Marketplace
Everything your AI needs, in one place.
Ready-made agents, skills, personas, prompts, templates and tools. Each one is checked before it goes live, works with any model, and installs in a click. Rate what you use so the best rises to the top.
- 143.8K
- listings
- 1
- installs
- 0
- reviews
- 38.7K
- publishers
A service that does a whole job for you - research, coding, support - and reports back.
Step-by-step instructions an AI follows for one kind of task. Install once, reuse everywhere.
A voice and set of rules layered onto any model: tone, audience, do's and don'ts.
A ready-to-use prompt with fill-in-the-blank variables and notes on when it works best.
A complete routing setup - models, rules and settings - in one file you can apply in a minute.
A single function an AI can call: a calculator, a search, a database lookup.
A language model endpoint with its price, speed and quality declared so the router can compare it.
detecting-anomalies-in-industrial-control-systems
Deploys anomaly detection for OT/ICS environments using machine learning on OT network baselines, physics-based process models, and Modbus/DNP3/OPC UA traffic analysis to flag deviations, rogue device
detecting-attacks-on-historian-servers
Detect cyber attacks on OT historian servers (OSIsoft PI, Ignition, GE Proficy, Wonderware InSQL) using a Python detector that flags unauthorized queries, data manipulation, and lateral-movement indic
detecting-attacks-on-scada-systems
This skill covers detecting cyber attacks targeting Supervisory Control and Data Acquisition (SCADA) systems including man-in-the-middle attacks on industrial protocols, unauthorized command injection
detecting-dnp3-protocol-anomalies
Detect anomalies in DNP3 communications used in SCADA/ICS systems by monitoring unauthorized control commands, firmware update attempts, protocol violations, and deviations from baseline traffic using
detecting-modbus-command-injection-attacks
Detect command injection against Modbus TCP/RTU in ICS/SCADA environments by monitoring unauthorized writes, anomalous function codes, malformed frames, and deviations from communication baselines usi
detecting-modbus-protocol-anomalies
Detect anomalies in Modbus/TCP and Modbus RTU industrial traffic via function code monitoring, register range validation, timing analysis, and deep packet inspection, using Zeek's Modbus analyzer, Sur
detecting-stuxnet-style-attacks
Detects sophisticated cyber-physical attacks that follow the Stuxnet pattern of modifying PLC logic while spoofing sensor readings to hide the manipulation, using PLC logic integrity monitoring (Claro
implementing-conduit-security-for-ot-remote-access
Implements secure conduit architecture for OT remote access under the IEC 62443 zones-and-conduits model, deploying jump servers, MFA gateways, session recording, and approval-based workflows for vend
implementing-dragos-platform-for-ot-monitoring
Deploys and configures Dragos Platform sensors and detection analytics for OT/ICS network monitoring, using industrial protocol parsers and threat-intel packs to detect groups like VOLTZITE, CHERNOVIT
implementing-ics-firewall-with-tofino
Deploys and configures Tofino industrial firewalls (Belden/Hirschmann) to protect SCADA systems and PLCs, using deep packet inspection of OT protocols (Modbus, EtherNet/IP, OPC, S7comm) to enforce acc
implementing-iec-62443-security-zones
Designs security zones and conduits for industrial control systems (IACS) per IEC 62443-3-2 — risk-based zone partitioning, Security Level target (SL-T) assignment, conduit controls, and firewall micr
implementing-nerc-cip-compliance-controls
Implements NERC CIP controls for Bulk Electric System (BES) cyber systems: asset categorization (CIP-002), electronic security perimeters (CIP-005), system security management (CIP-007), configuration
implementing-network-segmentation-for-ot
Implements OT network segmentation using VLANs, OT-aware firewalls, data diodes, and IEC 62443 zone/conduit architecture, with a traffic-baseline-driven design tool for migrating flat Purdue-model net
implementing-ot-incident-response-playbook
Develops OT-specific incident response playbooks using a SANS PICERL-based Python engine that classifies incident severity (safety, process, access, recon) and coordinates IT SOC, OT engineering, and
implementing-ot-network-traffic-analysis-with-nozomi
Deploy Nozomi Networks Guardian sensors for passive OT network traffic analysis, providing asset visibility, behavioral anomaly detection, protocol-aware monitoring, and vulnerability assessment acros
implementing-patch-management-for-ot-systems
Implements a structured patch management program for OT/ICS environments where IT-style patching can cause process disruption or safety hazards, covering vendor compatibility testing, risk-based prior
implementing-purdue-model-network-segmentation
Implement network segmentation based on the Purdue Enterprise Reference Architecture (PERA) model, separating ICS networks into hierarchical security zones from Level 0 physical process through Level
performing-ics-asset-discovery-with-claroty
Performs ICS/OT asset discovery with Claroty xDome, combining passive monitoring and Claroty Edge active queries to inventory PLCs, RTUs, HMIs, and network infrastructure across Purdue Model levels. U
performing-oil-gas-cybersecurity-assessment
Conduct cybersecurity assessments of upstream, midstream, and downstream oil and gas operations, covering pipeline SCADA, refinery DCS, safety instrumented systems, and remote wellhead RTUs, and evalu
performing-ot-network-security-assessment
This skill covers conducting comprehensive security assessments of Operational Technology (OT) networks including SCADA systems, DCS architectures, and industrial control system communication paths. I
performing-ot-vulnerability-assessment-with-claroty
Perform OT vulnerability assessments using the Claroty xDome platform for asset discovery, risk scoring, and vulnerability correlation, combining passive traffic-based identification and active safe d
performing-ot-vulnerability-scanning-safely
Perform vulnerability scanning in OT/ICS environments safely using passive monitoring, native protocol queries, and carefully controlled active scanning with Tenable OT Security to identify vulnerabil
performing-plc-firmware-security-analysis
This skill covers analyzing Programmable Logic Controller (PLC) firmware for security vulnerabilities including hardcoded credentials, insecure update mechanisms, backdoor functions, memory corruption
performing-power-grid-cybersecurity-assessment
Conduct cybersecurity assessments of power grid infrastructure spanning generation, transmission substations, distribution, and EMS control centers, covering NERC CIP compliance verification, IEC 6185
Find
Search or browse by kind. Every card shows who made it, how many people installed it and what they think.
Install
One click. You get a manifest the router understands, plus copy-paste snippets for the CLI, Python and YAML.
Rate and publish
Leave a star rating after you have used it. Made something useful? Publish it - free listings go live immediately.
Prefer the terminal? osr stack apply registry://starter installs the starter template.