OPSX: Archive

Prompt file imported from TanglmChris/keel (.claude/commands/opsx/archive.md). Copyright stays with the author.

Archive a completed change in the experimental workflow.

Store selection: If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run openspec store list --json to discover registered store ids, then pass --store <id> on the commands that read or write specs and changes (new change, status, instructions, list, show, validate, archive, doctor, context). Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local openspec/ root.

Input: Optionally specify a change name after /opsx:archive (e.g., /opsx:archive add-auth). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.

Steps

1. If no change name provided, prompt for selection

   Run openspec list --json to get available changes. Use the AskUserQuestion tool to let the user select.

   Show only active changes (not already archived). Include the schema used for each change if available.

   IMPORTANT: Do NOT guess or auto-select a change. Always let the user choose.

2. Check artifact completion status

   Run openspec status --change "<name>" --json to check artifact completion.

   Parse the JSON to understand:

   • schemaName: The workflow being used
   • planningHome, changeRoot, artifactPaths, and actionContext: path and scope context
   • artifacts: List of artifacts with their status (done or other)

   If any artifacts are not done:

   • Display warning listing incomplete artifacts
   • Prompt user for confirmation to continue
   • Proceed if user confirms

3. Check task completion status

   Read the tasks file (typically tasks.md) to check for incomplete tasks.

   Count tasks marked with - [ ] (incomplete) vs - [x] (complete).

   If incomplete tasks found:

   • Display warning showing count of incomplete tasks
   • Prompt user for confirmation to continue
   • Proceed if user confirms

   If no tasks file exists: Proceed without task-related warning.

4. Assess delta spec sync state

   Use artifactPaths.specs.existingOutputPaths from status JSON to check for delta specs. If none exist, proceed without sync prompt.

   If delta specs exist:

   • Compare each delta spec with its corresponding main spec at openspec/specs/<capability>/spec.md
   • Determine what changes would be applied (adds, modifications, removals, renames)
   • Show a combined summary before prompting

   Prompt options:

   • If changes needed: "Sync now (recommended)", "Archive without syncing"
   • If already synced: "Archive now", "Sync anyway", "Cancel"

   If user chooses sync, use Task tool (subagent_type: "general-purpose", prompt: "Use Skill tool to invoke openspec-sync-specs for change ''. Delta spec analysis: "). Proceed to archive regardless of choice.

5. Perform the archive

   Create an archive directory under planningHome.changesDir if it doesn't exist:

   mkdir -p "<planningHome.changesDir>/archive"

   Generate target name using current date: YYYY-MM-DD-<change-name>

   Check if target already exists:

   • If yes: Fail with error, suggest renaming existing archive or using different date
   • If no: Move changeRoot to the archive directory

   mv "<changeRoot>" "<planningHome.changesDir>/archive/YYYY-MM-DD-<name>"

6. Display summary

   Show archive completion summary including:

   • Change name
   • Schema that was used
   • Archive location
   • Spec sync status (synced / sync skipped / no delta specs)
   • Note about any warnings (incomplete artifacts/tasks)

Output On Success

## Archive Complete

**Change:** <change-name>
**Schema:** <schema-name>
**Archived to:** the archive path derived from `planningHome.changesDir`/YYYY-MM-DD-<name>/
**Specs:** ✓ Synced to main specs

All artifacts complete. All tasks complete.

Output On Success (No Delta Specs)

## Archive Complete

**Change:** <change-name>
**Schema:** <schema-name>
**Archived to:** the archive path derived from `planningHome.changesDir`/YYYY-MM-DD-<name>/
**Specs:** No delta specs

All artifacts complete. All tasks complete.

Output On Success With Warnings

## Archive Complete (with warnings)

**Change:** <change-name>
**Schema:** <schema-name>
**Archived to:** the archive path derived from `planningHome.changesDir`/YYYY-MM-DD-<name>/
**Specs:** Sync skipped (user chose to skip)

**Warnings:**
- Archived with 2 incomplete artifacts
- Archived with 3 incomplete tasks
- Delta spec sync was skipped (user chose to skip)

Review the archive if this was not intentional.

Output On Error (Archive Exists)

## Archive Failed

**Change:** <change-name>
**Target:** the archive path derived from `planningHome.changesDir`/YYYY-MM-DD-<name>/

Target archive directory already exists.

**Options:**
1. Rename the existing archive
2. Delete the existing archive if it's a duplicate
3. Wait until a different date to archive

Guardrails

• Always prompt for change selection if not provided
• Use artifact graph (openspec status --json) for completion checking
• Don't block archive on warnings - just inform and confirm
• Preserve .openspec.yaml when moving to archive (it moves with the directory)
• Show clear summary of what happened
• If sync is requested, use the Skill tool to invoke openspec-sync-specs (agent-driven)
• If delta specs exist, always run the sync assessment and show the combined summary before prompting

Keel Archive Overlay

Keel rules below take precedence over conflicting generic OpenSpec instructions in this file.

• Invoke the OpenSpec CLI as keel openspec … throughout this file. The commands below are written as a bare openspec, which resolves only where OpenSpec is separately installed on PATH; keel openspec resolves either way, and keel --doctor reports which case this repository is.

Target-native subagent gate

• The current agent remains responsible for Keel ownership, task/archive decisions, scope control, and final reporting.
• Use a target-native subagent when the current agent decides it is useful for a bounded helper step, or as a delegate implementing the selected task using existing task write authority when a guard manifest is active and matches the task, fingerprint and Touch; optional delegation: tiers are metadata.
• Target-native subagents acting as helpers return report/evidence only. A delegate may write, and only inside Touch; its reported command results are a claim, and the current agent re-runs each M<n> check itself before recording Evidence.
• Delegation is refused with no active guard manifest, because an absent manifest passes every write through silently and looks identical to a checked one.
• Neither may mark tasks complete, update OpenSpec state, commit, sync, archive, or change Acceptance; the current agent reviews all output before acting.
• The subagent brief must name the selected change/task, required read context, allowed write boundary or read-only diagnostic scope, expected commands/evidence, and prohibited actions. Compile it with keel project --event subagent-start for a read-only helper or add --subagent-mode implementation for a guarded delegate; no extra user activation is required. Host policy remains authoritative; Keel adds no separate carrier because the host already has one.
• Prohibited actions include scope expansion, Acceptance changes, completion marking, sync/archive decisions, commits, handoff changes, and cross-runtime delegation unless the selected task or user explicitly authorizes them.
• The current agent owns final sync/archive decisions and must verify task evidence, follow-up ownership, and completion gates before proceeding.
• Before final sync/archive, each related critical expectation must have behavior evidence, a durable follow-up owner, or an explicit discard reason.
• Target-native subagents may help with bounded assessment or evidence production only; they cannot archive, sync, change acceptance, or bypass completion gates.
• The current agent reviews any subagent report before running openspec-sync-specs, /opsx:sync, or /opsx:archive.
• Do not treat generic OpenSpec archive delegation language as authority to transfer Keel ownership.
• Invoke OpenSpec through keel openspec (for example keel openspec validate); a bare openspec command may not be on PATH.
• When /opsx:sync has already promoted the change's spec delta, run the archive with --skip-specs so the promoted delta is not re-applied; archive is not idempotent over an already-synced delta.
• After archiving, run keel guard clear to drop the change's guard manifest; the read-only gate never clears it for you.
• A repository that standing-authorizes archive in keel/config.yaml does not need the per-occurrence archive confirmation; a repository that declares nothing still needs it.
• The completion gate and follow-up ownership checks still run unchanged under a standing authorization; it removes the confirmation, not the proof.