Skip to content
Skillv1.0.0

network-tools

Linux network tools and diagnostics

by chaterm(0) 0 installs
Free
Sign in to install

Free account. Installing gives you the manifest plus copy-paste snippets.

See reviews

About

Imported from chaterm/terminal-skills (linux/network-tools/SKILL.md). Install upstream with npx skills add chaterm/terminal-skills --skill network-tools. Copyright stays with the author.

Network Tools and Diagnostics

Overview

Linux network diagnostics, port scanning, traffic analysis and other tool usage skills.

Network Configuration

View Configuration

# IP address
ip addr
ip a
ifconfig                            # Legacy command

# Routing table
ip route
route -n
netstat -rn

# DNS configuration
cat /etc/resolv.conf
systemd-resolve --status

Configure Network

# Temporary IP configuration
ip addr add 192.168.1.100/24 dev eth0
ip addr del 192.168.1.100/24 dev eth0

# Enable/Disable interface
ip link set eth0 up
ip link set eth0 down

# Add route
ip route add 10.0.0.0/8 via 192.168.1.1
ip route del 10.0.0.0/8

Connectivity Testing

ping

ping hostname
ping -c 4 hostname                  # Send 4 packets
ping -i 0.2 hostname                # 0.2 second interval
ping -s 1000 hostname               # Specify packet size

traceroute

traceroute hostname
traceroute -n hostname              # Don't resolve hostnames
traceroute -T hostname              # Use TCP
mtr hostname                        # Real-time trace

DNS Query

nslookup hostname
dig hostname
dig +short hostname
dig @8.8.8.8 hostname               # Specify DNS server
host hostname

Ports and Connections

ss Command (Recommended)

# Listening ports
ss -tlnp                            # TCP listening
ss -ulnp                            # UDP listening
ss -tlnp | grep :80

# All connections
ss -tanp                            # TCP connections
ss -s                               # Statistics

# Filter
ss -t state established
ss -t dst 192.168.1.1
ss -t sport = :80

netstat Command

netstat -tlnp                       # TCP listening
netstat -ulnp                       # UDP listening
netstat -anp                        # All connections
netstat -s                          # Statistics

lsof Network

lsof -i                             # All network connections
lsof -i :80                         # Specific port
lsof -i tcp                         # TCP connections
lsof -i @192.168.1.1                # Specific host

HTTP Tools

curl

# Basic request
curl http://example.com
curl -I http://example.com          # Headers only
curl -v http://example.com          # Verbose output

# POST request
curl -X POST -d "data=value" http://example.com
curl -X POST -H "Content-Type: application/json" -d '{"key":"value"}' http://example.com

# Download
curl -O http://example.com/file.zip
curl -o output.zip http://example.com/file.zip

# Authentication
curl -u user:pass http://example.com
curl -H "Authorization: Bearer token" http://example.com

wget

wget http://example.com/file.zip
wget -c http://example.com/file.zip # Resume download
wget -r http://example.com          # Recursive download
wget --mirror http://example.com    # Mirror site

Packet Capture

tcpdump

# Basic capture
tcpdump -i eth0
tcpdump -i any

# Filter
tcpdump -i eth0 port 80
tcpdump -i eth0 host 192.168.1.1
tcpdump -i eth0 'tcp port 80 and host 192.168.1.1'

# Save/Read
tcpdump -i eth0 -w capture.pcap
tcpdump -r capture.pcap

# Display content
tcpdump -i eth0 -A port 80          # ASCII
tcpdump -i eth0 -X port 80          # Hexadecimal

Traffic Monitoring

# Real-time traffic
iftop
iftop -i eth0

# By process
nethogs
nethogs eth0

# Bandwidth test
iperf3 -s                           # Server
iperf3 -c server_ip                 # Client

Common Scenarios

Scenario 1: Troubleshoot Port Usage

# Check port usage
ss -tlnp | grep :8080
lsof -i :8080

# Find process and handle
kill -9 PID
# Or
fuser -k 8080/tcp

Scenario 2: Test Service Connectivity

# TCP port test
nc -zv hostname 80
telnet hostname 80

# HTTP service test
curl -I http://hostname
curl -w "HTTP Code: %{http_code}\nTime: %{time_total}s\n" -o /dev/null -s http://hostname

Scenario 3: Network Performance Diagnosis

# Latency test
ping -c 100 hostname | tail -1

# Route analysis
mtr --report hostname

# Bandwidth test
iperf3 -c server -t 30

Troubleshooting

Problem Solution
Network unreachable ping, traceroute, check routing
DNS resolution failed dig, nslookup, check resolv.conf
Port unreachable ss -tlnp, check firewall
Connection timeout mtr, tcpdump packet capture
Insufficient bandwidth iftop, iperf3 test

Use it

Copy one of these into your project. Installing also returns the manifest and these snippets.

yaml
targets:
  - https://api.opensmartroute.ai/api/v1/registry/chaterm-terminal-skills-network-tools/manifest   # or paste the manifest below

Manifest

An Open Capability Manifest: the router reads it to know what this does, what it costs and when to pick it.

chaterm-terminal-skills-network-tools.ocm.jsonjson
{
  "ocm": "1",
  "id": "chaterm-terminal-skills-network-tools",
  "kind": "skill",
  "name": "network-tools",
  "description": "Linux network tools and diagnostics",
  "publisher": "chaterm",
  "version": "1.0.0",
  "capabilities": {
    "domains": [
      "general"
    ],
    "tags": [
      "skill-md",
      "linux",
      "network",
      "diagnosis",
      "netstat",
      "ss",
      "curl",
      "skills-sh"
    ],
    "languages": [
      "en"
    ]
  },
  "quality_prior": 0.6,
  "examples": [
    "Linux network tools and diagnostics"
  ],
  "primary": false,
  "metadata": {
    "source": {
      "provider": "skills.sh",
      "repository": "https://github.com/chaterm/terminal-skills",
      "path": "linux/network-tools/SKILL.md",
      "ref": "HEAD",
      "url": "https://github.com/chaterm/terminal-skills/blob/HEAD/linux/network-tools/SKILL.md",
      "key": "chaterm/terminal-skills/linux/network-tools/SKILL.md"
    }
  },
  "instructions": "# Network Tools and Diagnostics\n\n## Overview\nLinux network diagnostics, port scanning, traffic analysis and other tool usage skills.\n\n## Network Configuration\n\n### View Configuration\n```bash\n# IP address\nip addr\nip a\nifconfig                            # Legacy command\n\n# Routing table\nip route\nroute -n\nnetstat -rn\n\n# DNS configuration\ncat /etc/resolv.conf\nsystemd-resolve --status\n```\n\n### Configure Network\n```bash\n# Temporary IP configuration\nip addr add 192.168.1.100/24 dev eth0\nip addr del 192.168.1.100/24 dev eth0\n\n# Enable/Disable interface\nip link set eth0 up\nip link set eth0 down\n\n# Add",
  "cost": {
    "context_tokens": 1125
  }
}

Fetch it by URL: GET /api/v1/registry/chaterm-terminal-skills-network-tools/manifest?version=1.0.0

Reviews

Star ratings from people who tried it. One review per account; edit yours any time.

No reviews yet. Install it, try it, and be the first to rate it.