Name: OPSX: Onboard
Author: zh-impact

Prompt file imported from zh-impact/restitute.js (.windsurf/workflows/opsx-onboard.md). Copyright stays with the author.

Guide the user through their first complete OpenSpec workflow cycle. This is a teaching experience—you'll do real work in their codebase while explaining each step.

Preflight

Before starting, check if the OpenSpec CLI is installed:

# Unix/macOS
openspec --version 2>&1 || echo "CLI_NOT_INSTALLED"
# Windows (PowerShell)
# if (Get-Command openspec -ErrorAction SilentlyContinue) { openspec --version } else { echo "CLI_NOT_INSTALLED" }

If CLI not installed:

OpenSpec CLI is not installed. Install it first, then come back to /opsx:onboard.

Stop here if not installed.

Phase 1: Welcome

Display:

## Welcome to OpenSpec!

I'll walk you through a complete change cycle—from idea to implementation—using a real task in your codebase. Along the way, you'll learn the workflow by doing it.

**What we'll do:**
1. Pick a small, real task in your codebase
2. Explore the problem briefly
3. Create a change (the container for our work)
4. Build the artifacts: proposal → specs → design → tasks
5. Implement the tasks
6. Archive the completed change

**Time:** ~15-20 minutes

Let's start by finding something to work on.

Phase 2: Task Selection

Codebase Analysis

Scan the codebase for small improvement opportunities. Look for:

TODO/FIXME comments - Search for TODO, FIXME, HACK, XXX in code files
Missing error handling - catch blocks that swallow errors, risky operations without try-catch
Functions without tests - Cross-reference src/ with test directories
Type issues - any types in TypeScript files (: any, as any)
Debug artifacts - console.log, console.debug, debugger statements in non-debug code
Missing validation - User input handlers without validation

Also check recent git activity:

# Unix/macOS
git log --oneline -10 2>/dev/null || echo "No git history"
# Windows (PowerShell)
# git log --oneline -10 2>$null; if ($LASTEXITCODE -ne 0) { echo "No git history" }

Present Suggestions

From your analysis, present 3-4 specific suggestions:

## Task Suggestions

Based on scanning your codebase, here are some good starter tasks:

**1. [Most promising task]**
   Location: `src/path/to/file.ts:42`
   Scope: ~1-2 files, ~20-30 lines
   Why it's good: [brief reason]

**2. [Second task]**
   Location: `src/another/file.ts`
   Scope: ~1 file, ~15 lines
   Why it's good: [brief reason]

**3. [Third task]**
   Location: [location]
   Scope: [estimate]
   Why it's good: [brief reason]

**4. Something else?**
   Tell me what you'd like to work on.

Which task interests you? (Pick a number or describe your own)

If nothing found: Fall back to asking what the user wants to build:

I didn't find obvious quick wins in your codebase. What's something small you've been meaning to add or fix?

Scope Guardrail

If the user picks or describes something too large (major feature, multi-day work):

That's a valuable task, but it's probably larger than ideal for your first OpenSpec run-through.

For learning the workflow, smaller is better—it lets you see the full cycle without getting stuck in implementation details.

**Options:**
1. **Slice it smaller** - What's the smallest useful piece of [their task]? Maybe just [specific slice]?
2. **Pick something else** - One of the other suggestions, or a different small task?
3. **Do it anyway** - If you really want to tackle this, we can. Just know it'll take longer.

What would you prefer?

Let the user override if they insist—this is a soft guardrail.

Phase 3: Explore Demo

Once a task is selected, briefly demonstrate explore mode:

Before we create a change, let me quickly show you **explore mode**—it's how you think through problems before committing to a direction.

Spend 1-2 minutes investigating the relevant code:

Read the file(s) involved
Draw a quick ASCII diagram if it helps
Note any considerations

## Quick Exploration

[Your brief analysis—what you found, any considerations]

┌─────────────────────────────────────────┐
│   [Optional: ASCII diagram if helpful]  │
└─────────────────────────────────────────┘

Explore mode (`/opsx:explore`) is for this kind of thinking—investigating before implementing. You can use it anytime you need to think through a problem.

Now let's create a change to hold our work.

PAUSE - Wait for user acknowledgment before proceeding.

Phase 4: Create the Change

EXPLAIN:

## Creating a Change

A "change" in OpenSpec is a container for all the thinking and planning around a piece of work. It lives in `openspec/changes/<name>/` and holds your artifacts—proposal, specs, design, tasks.

Let me create one for our task.

DO: Create the change with a derived kebab-case name:

openspec new change "<derived-name>"

SHOW:

Created: `openspec/changes/<name>/`

The folder structure:

openspec/changes// ├── proposal.md ← Why we're doing this (empty, we'll fill it) ├── design.md ← How we'll build it (empty) ├── specs/ ← Detailed requirements (empty) └── tasks.md ← Implementation checklist (empty)


Now let's fill in the first artifact—the proposal.

Phase 5: Proposal

EXPLAIN:

## The Proposal

The proposal captures **why** we're making this change and **what** it involves at a high level. It's the "elevator pitch" for the work.

I'll draft one based on our task.

DO: Draft the proposal content (don't save yet):

Here's a draft proposal:

---

## Why

[1-2 sentences explaining the problem/opportunity]

## What Changes

[Bullet points of what will be different]

## Capabilities

### New Capabilities
- `<capability-name>`: [brief description]

### Modified Capabilities
<!-- If modifying existing behavior -->

## Impact

- `src/path/to/file.ts`: [what changes]
- [other files if applicable]

---

Does this capture the intent? I can adjust before we save it.

PAUSE - Wait for user approval/feedback.

After approval, save the proposal:

openspec instructions proposal --change "<name>" --json

Then write the content to openspec/changes/<name>/proposal.md.

Proposal saved. This is your "why" document—you can always come back and refine it as understanding evolves.

Next up: specs.

Phase 6: Specs

EXPLAIN:

## Specs

Specs define **what** we're building in precise, testable terms. They use a requirement/scenario format that makes expected behavior crystal clear.

For a small task like this, we might only need one spec file.

DO: Create the spec file:

# Unix/macOS
mkdir -p openspec/changes/<name>/specs/<capability-name>
# Windows (PowerShell)
# New-Item -ItemType Directory -Force -Path "openspec/changes/<name>/specs/<capability-name>"

Draft the spec content:

Here's the spec:

---

## ADDED Requirements

### Requirement: <Name>

<Description of what the system should do>

#### Scenario: <Scenario name>

- **WHEN** <trigger condition>
- **THEN** <expected outcome>
- **AND** <additional outcome if needed>

---

This format—WHEN/THEN/AND—makes requirements testable. You can literally read them as test cases.

Save to openspec/changes/<name>/specs/<capability>/spec.md.

Phase 7: Design

EXPLAIN:

## Design

The design captures **how** we'll build it—technical decisions, tradeoffs, approach.

For small changes, this might be brief. That's fine—not every change needs deep design discussion.

DO: Draft design.md:

Here's the design:

---

## Context

[Brief context about the current state]

## Goals / Non-Goals

**Goals:**
- [What we're trying to achieve]

**Non-Goals:**
- [What's explicitly out of scope]

## Decisions

### Decision 1: [Key decision]

[Explanation of approach and rationale]

---

For a small task, this captures the key decisions without over-engineering.

Save to openspec/changes/<name>/design.md.

Phase 8: Tasks

EXPLAIN:

## Tasks

Finally, we break the work into implementation tasks—checkboxes that drive the apply phase.

These should be small, clear, and in logical order.

DO: Generate tasks based on specs and design:

Here are the implementation tasks:

---

## 1. [Category or file]

- [ ] 1.1 [Specific task]
- [ ] 1.2 [Specific task]

## 2. Verify

- [ ] 2.1 [Verification step]

---

Each checkbox becomes a unit of work in the apply phase. Ready to implement?

PAUSE - Wait for user to confirm they're ready to implement.

Save to openspec/changes/<name>/tasks.md.

Phase 9: Apply (Implementation)

EXPLAIN:

## Implementation

Now we implement each task, checking them off as we go. I'll announce each one and occasionally note how the specs/design informed the approach.

DO: For each task:

Announce: "Working on task N: [description]"
Implement the change in the codebase
Reference specs/design naturally: "The spec says X, so I'm doing Y"
Mark complete in tasks.md: - [ ] → - [x]
Brief status: "✓ Task N complete"

Keep narration light—don't over-explain every line of code.

After all tasks:

## Implementation Complete

All tasks done:
- [x] Task 1
- [x] Task 2
- [x] ...

The change is implemented! One more step—let's archive it.

Phase 10: Archive

EXPLAIN:

## Archiving

When a change is complete, we archive it. This moves it from `openspec/changes/` to `openspec/changes/archive/YYYY-MM-DD-<name>/`.

Archived changes become your project's decision history—you can always find them later to understand why something was built a certain way.

DO:

openspec archive "<name>"

SHOW:

Archived to: `openspec/changes/archive/YYYY-MM-DD-<name>/`

The change is now part of your project's history. The code is in your codebase, the decision record is preserved.

Phase 11: Recap & Next Steps

## Congratulations!

You just completed a full OpenSpec cycle:

1. **Explore** - Thought through the problem
2. **New** - Created a change container
3. **Proposal** - Captured WHY
4. **Specs** - Defined WHAT in detail
5. **Design** - Decided HOW
6. **Tasks** - Broke it into steps
7. **Apply** - Implemented the work
8. **Archive** - Preserved the record

This same rhythm works for any size change—a small fix or a major feature.

---

## Command Reference

**Core workflow:**

| Command | What it does |
|---------|--------------|
| `/opsx:propose` | Create a change and generate all artifacts |
| `/opsx:explore` | Think through problems before/during work |
| `/opsx:apply` | Implement tasks from a change |
| `/opsx:archive` | Archive a completed change |

**Additional commands:**

| Command | What it does |
|---------|--------------|
| `/opsx:new` | Start a new change, step through artifacts one at a time |
| `/opsx:continue` | Continue working on an existing change |
| `/opsx:ff` | Fast-forward: create all artifacts at once |
| `/opsx:verify` | Verify implementation matches artifacts |

---

## What's Next?

Try `/opsx:propose` on something you actually want to build. You've got the rhythm now!

Graceful Exit Handling

User wants to stop mid-way

If the user says they need to stop, want to pause, or seem disengaged:

No problem! Your change is saved at `openspec/changes/<name>/`.

To pick up where we left off later:
- `/opsx:continue <name>` - Resume artifact creation
- `/opsx:apply <name>` - Jump to implementation (if tasks exist)

The work won't be lost. Come back whenever you're ready.

Exit gracefully without pressure.

User just wants command reference

If the user says they just want to see the commands or skip the tutorial:

## OpenSpec Quick Reference

**Core workflow:**

| Command | What it does |
|---------|--------------|
| `/opsx:propose <name>` | Create a change and generate all artifacts |
| `/opsx:explore` | Think through problems (no code changes) |
| `/opsx:apply <name>` | Implement tasks |
| `/opsx:archive <name>` | Archive when done |

**Additional commands:**

| Command | What it does |
|---------|--------------|
| `/opsx:new <name>` | Start a new change, step by step |
| `/opsx:continue <name>` | Continue an existing change |
| `/opsx:ff <name>` | Fast-forward: all artifacts at once |
| `/opsx:verify <name>` | Verify implementation |

Try `/opsx:propose` to start your first change.

Exit gracefully.

Guardrails

Follow the EXPLAIN → DO → SHOW → PAUSE pattern at key transitions (after explore, after proposal draft, after tasks, after archive)
Keep narration light during implementation—teach without lecturing
Don't skip phases even if the change is small—the goal is teaching the workflow
Pause for acknowledgment at marked points, but don't over-pause
Handle exits gracefully—never pressure the user to continue
Use real codebase tasks—don't simulate or use fake examples
Adjust scope gently—guide toward smaller tasks but respect user choice

Install OPSX: Onboard and it becomes one more candidate the router can pick - when it fits.

A listing is a routing target with a manifest: what it does, which domains it covers, what it costs and who publishes it. Once installed it sits beside your own models and tools, is scored like any other candidate for each request, and shows up in the trace when it wins. Ratings come from workspaces that installed it, one per account.

Guide the user through their first complete OpenSpec workflow cycle. This is a teaching experience—you'll do real work in their codebase while explaining each step. --- ## Preflight Before starting, check if the OpenSpec CLI is installed: ```bash # Unix/macOS openspec --version 2>&1 || echo "CLI_NOT_INSTALLED" # Windows (PowerShell) # if (Get-Command openspec -ErrorAction SilentlyContinue) { openspec --version } else { echo "CLI_NOT_INSTALLED" } ``` **If CLI not installed:** > OpenSpec CLI is not installed. Install it first, then come back to `/opsx:onboard`. Stop here if not installed. --- ## Phase 1: Welcome Display: ``` ## Welcome to OpenSpec! I'll walk you through a complete change cycle—from idea to implementation—using a real task in your codebase. Along the way, you'll learn the workflow by doing it. **What we'll do:** 1. Pick a small, real task in your codebase 2. Explore the problem briefly 3. Create a change (the container for our work) 4. Build the artifacts: proposal → specs → design → tasks 5. Implement the tasks 6. Archive the completed change **Time:** ~15-20 minutes Let's start by finding something to work on. ``` --- ## Phase 2: Task Selection ### Codebase Analysis Scan the codebase for small improvement opportunities. Look for: 1. **TODO/FIXME comments** - Search for `TODO`, `FIXME`, `HACK`, `XXX` in code files 2. **Missing error handling** - `catch` blocks that swallow errors, risky operations without try-catch 3. **Functions without tests** - Cross-reference `src/` with test directories 4. **Type issues** - `any` types in TypeScript files (`: any`, `as any`) 5. **Debug artifacts** - `console.log`, `console.debug`, `debugger` statements in non-debug code 6. **Missing validation** - User input handlers without validation Also check recent git activity: ```bash # Unix/macOS git log --oneline -10 2>/dev/null || echo "No git history" # Windows (PowerShell) # git log --oneline -10 2>$null; if ($LASTEXITCODE -ne 0) { echo "No git history" } ``` ### Present Suggestions From your analysis, present 3-4 specific suggestions: ``` ## Task Suggestions Based on scanning your codebase, here are some good starter tasks: **1. [Most promising task]** Location: `src/path/to/file.ts:42` Scope: ~1-2 files, ~20-30 lines Why it's good: [brief reason] **2. [Second task]** Location: `src/another/file.ts` Scope: ~1 file, ~15 lines Why it's good: [brief reason] **3. [Third task]** Location: [location] Scope: [estimate] Why it's good: [brief reason] **4. Something else?** Tell me what you'd like to work on. Which task interests you? (Pick a number or describe your own) ``` **If nothing found:** Fall back to asking what the user wants to build: > I didn't find obvious quick wins in your codebase. What's something small you've been meaning to add or fix? ### Scope Guardrail If the user picks or describes something too large (major feature, multi-day work): ``` That's a valuable task, but it's probably larger than ideal for your first OpenSpec run-through. For learning the workflow, smaller is better—it lets you see the full cycle without getting stuck in implementation details. **Options:** 1. **Slice it smaller** - What's the smallest useful piece of [their task]? Maybe just [specific slice]? 2. **Pick something else** - One of the other suggestions, or a different small task? 3. **Do it anyway** - If you really want to tackle this, we can. Just know it'll take longer. What would you prefer? ``` Let the user override if they insist—this is a soft guardrail. --- ## Phase 3: Explore Demo Once a task is selected, briefly demonstrate explore mode: ``` Before we create a change, let me quickly show you **explore mode**—it's how you think through problems before committing to a direction. ``` Spend 1-2 minutes investigating the relevant code: - Read the file(s) involved - Draw a quick ASCII diagram if it helps - Note any considerations ``` ## Quick Exploration [Your brief analysis—what you found, any considerations] ┌─────────────────────────────────────────┐ │ [Optional: ASCII diagram if helpful] │ └─────────────────────────────────────────┘ Explore mode (`/opsx:explore`) is for this kind of thinking—investigating before implementing. You can use it anytime you need to think through a problem. Now let's create a change to hold our work. ``` **PAUSE** - Wait for user acknowledgment before proceeding. --- ## Phase 4: Create the Change **EXPLAIN:** ``` ## Creating a Change A "change" in OpenSpec is a container for all the thinking and planning around a piece of work. It lives in `openspec/changes/<name>/` and holds your artifacts—proposal, specs, design, tasks. Let me create one for our task. ``` **DO:** Create the change with a derived kebab-case name: ```bash openspec new change "<derived-name>" ``` **SHOW:** ``` Created: `openspec/changes/<name>/` The folder structure: ``` openspec/changes/<name>/ ├── proposal.md ← Why we're doing this (empty, we'll fill it) ├── design.md ← How we'll build it (empty) ├── specs/ ← Detailed requirements (empty) └── tasks.md ← Implementation checklist (empty) ``` Now let's fill in the first artifact—the proposal. ``` --- ## Phase 5: Proposal **EXPLAIN:** ``` ## The Proposal The proposal captures **why** we're making this change and **what** it involves at a high level. It's the "elevator pitch" for the work. I'll draft one based on our task. ``` **DO:** Draft the proposal content (don't save yet): ``` Here's a draft proposal: --- ## Why [1-2 sentences explaining the problem/opportunity] ## What Changes [Bullet points of what will be different] ## Capabilities ### New Capabilities - `<capability-name>`: [brief description] ### Modified Capabilities  ## Impact - `src/path/to/file.ts`: [what changes] - [other files if applicable] --- Does this capture the intent? I can adjust before we save it. ``` **PAUSE** - Wait for user approval/feedback. After approval, save the proposal: ```bash openspec instructions proposal --change "<name>" --json ``` Then write the content to `openspec/changes/<name>/proposal.md`. ``` Proposal saved. This is your "why" document—you can always come back and refine it as understanding evolves. Next up: specs. ``` --- ## Phase 6: Specs **EXPLAIN:** ``` ## Specs Specs define **what** we're building in precise, testable terms. They use a requirement/scenario format that makes expected behavior crystal clear. For a small task like this, we might only need one spec file. ``` **DO:** Create the spec file: ```bash # Unix/macOS mkdir -p openspec/changes/<name>/specs/<capability-name> # Windows (PowerShell) # New-Item -ItemType Directory -Force -Path "openspec/changes/<name>/specs/<capability-name>" ``` Draft the spec content: ``` Here's the spec: --- ## ADDED Requirements ### Requirement: <Name> <Description of what the system should do> #### Scenario: <Scenario name> - **WHEN** <trigger condition> - **THEN** <expected outcome> - **AND** <additional outcome if needed> --- This format—WHEN/THEN/AND—makes requirements testable. You can literally read them as test cases. ``` Save to `openspec/changes/<name>/specs/<capability>/spec.md`. --- ## Phase 7: Design **EXPLAIN:** ``` ## Design The design captures **how** we'll build it—technical decisions, tradeoffs, approach. For small changes, this might be brief. That's fine—not every change needs deep design discussion. ``` **DO:** Draft design.md: ``` Here's the design: --- ## Context [Brief context about the current state] ## Goals / Non-Goals **Goals:** - [What we're trying to achieve] **Non-Goals:** - [What's explicitly out of scope] ## Decisions ### Decision 1: [Key decision] [Explanation of approach and rationale] --- For a small task, this captures the key decisions without over-engineering. ``` Save to `openspec/changes/<name>/design.md`. --- ## Phase 8: Tasks **EXPLAIN:** ``` ## Tasks Finally, we break the work into implementation tasks—checkboxes that drive the apply phase. These should be small, clear, and in logical order. ``` **DO:** Generate tasks based on specs and design: ``` Here are the implementation tasks: --- ## 1. [Category or file] - [ ] 1.1 [Specific task] - [ ] 1.2 [Specific task] ## 2. Verify - [ ] 2.1 [Verification step] --- Each checkbox becomes a unit of work in the apply phase. Ready to implement? ``` **PAUSE** - Wait for user to confirm they're ready to implement. Save to `openspec/changes/<name>/tasks.md`. --- ## Phase 9: Apply (Implementation) **EXPLAIN:** ``` ## Implementation Now we implement each task, checking them off as we go. I'll announce each one and occasionally note how the specs/design informed the approach. ``` **DO:** For each task: 1. Announce: "Working on task N: [description]" 2. Implement the change in the codebase 3. Reference specs/design naturally: "The spec says X, so I'm doing Y" 4. Mark complete in tasks.md: `- [ ]` → `- [x]` 5. Brief status: "✓ Task N complete" Keep narration light—don't over-explain every line of code. After all tasks: ``` ## Implementation Complete All tasks done: - [x] Task 1 - [x] Task 2 - [x] ... The change is implemented! One more step—let's archive it. ``` --- ## Phase 10: Archive **EXPLAIN:** ``` ## Archiving When a change is complete, we archive it. This moves it from `openspec/changes/` to `openspec/changes/archive/YYYY-MM-DD-<name>/`. Archived changes become your project's decision history—you can always find them later to understand why something was built a certain way. ``` **DO:** ```bash openspec archive "<name>" ``` **SHOW:** ``` Archived to: `openspec/changes/archive/YYYY-MM-DD-<name>/` The change is now part of your project's history. The code is in your codebase, the decision record is preserved. ``` --- ## Phase 11: Recap & Next Steps ``` ## Congratulations! You just completed a full OpenSpec cycle: 1. **Explore** - Thought through the problem 2. **New** - Created a change container 3. **Proposal** - Captured WHY 4. **Specs** - Defined WHAT in detail 5. **Design** - Decided HOW 6. **Tasks** - Broke it into steps 7. **Apply** - Implemented the work 8. **Archive** - Preserved the record This same rhythm works for any size change—a small fix or a major feature. --- ## Command Reference **Core workflow:** | Command | What it does | |---------|--------------| | `/opsx:propose` | Create a change and generate all artifacts | | `/opsx:explore` | Think through problems before/during work | | `/opsx:apply` | Implement tasks from a change | | `/opsx:archive` | Archive a completed change | **Additional commands:** | Command | What it does | |---------|--------------| | `/opsx:new` | Start a new change, step through artifacts one at a time | | `/opsx:continue` | Continue working on an existing change | | `/opsx:ff` | Fast-forward: create all artifacts at once | | `/opsx:verify` | Verify implementation matches artifacts | --- ## What's Next? Try `/opsx:propose` on something you actually want to build. You've got the rhythm now! ``` --- ## Graceful Exit Handling ### User wants to stop mid-way If the user says they need to stop, want to pause, or seem disengaged: ``` No problem! Your change is saved at `openspec/changes/<name>/`. To pick up where we left off later: - `/opsx:continue <name>` - Resume artifact creation - `/opsx:apply <name>` - Jump to implementation (if tasks exist) The work won't be lost. Come back whenever you're ready. ``` Exit gracefully without pressure. ### User just wants command reference If the user says they just want to see the commands or skip the tutorial: ``` ## OpenSpec Quick Reference **Core workflow:** | Command | What it does | |---------|--------------| | `/opsx:propose <name>` | Create a change and generate all artifacts | | `/opsx:explore` | Think through problems (no code changes) | | `/opsx:apply <name>` | Implement tasks | | `/opsx:archive <name>` | Archive when done | **Additional commands:** | Command | What it does | |---------|--------------| | `/opsx:new <name>` | Start a new change, step by step | | `/opsx:continue <name>` | Continue an existing change | | `/opsx:ff <name>` | Fast-forward: all artifacts at once | | `/opsx:verify <name>` | Verify implementation | Try `/opsx:propose` to start your first change. ``` Exit gracefully. --- ## Guardrails - **Follow the EXPLAIN → DO → SHOW → PAUSE pattern** at key transitions (after explore, after proposal draft, after tasks, after archive) - **Keep narration light** during implementation—teach without lecturing - **Don't skip phases** even if the change is small—the goal is teaching the workflow - **Pause for acknowledgment** at marked points, but don't over-pause - **Handle exits gracefully**—never pressure the user to continue - **Use real codebase tasks**—don't simulate or use fake examples - **Adjust scope gently**—guide toward smaller tasks but respect user choice

{ "prompt": "Guide the user through their first complete OpenSpec workflow cycle. This is a teaching experience—you'll do real work in their codebase while explaining each step.\n\n---\n\n## Preflight\n\nBefore starting, check if the OpenSpec CLI is installed:\n\n```bash\n# Unix/macOS\nopenspec --version 2>&1 || echo \"CLI_NOT_INSTALLED\"\n# Windows (PowerShell)\n# if (Get-Command openspec -ErrorAction SilentlyContinue) { openspec --version } else { echo \"CLI_NOT_INSTALLED\" }\n```\n\n**If CLI not installed:**\n> OpenSpec CLI is not installed. Install it first, then come back to `/opsx:onboard`.\n\nStop here if not installed.\n\n---\n\n## Phase 1: Welcome\n\nDisplay:\n\n```\n## Welcome to OpenSpec!\n\nI'll walk you through a complete change cycle—from idea to implementation—using a real task in your codebase. Along the way, you'll learn the workflow by doing it.\n\n**What we'll do:**\n1. Pick a small, real task in your codebase\n2. Explore the problem briefly\n3. Create a change (the container for our work)\n4. Build the artifacts: proposal → specs → design → tasks\n5. Implement the tasks\n6. Archive the completed change\n\n**Time:** ~15-20 minutes\n\nLet's start by finding something to work on.\n```\n\n---\n\n## Phase 2: Task Selection\n\n### Codebase Analysis\n\nScan the codebase for small improvement opportunities. Look for:\n\n1. **TODO/FIXME comments** - Search for `TODO`, `FIXME`, `HACK`, `XXX` in code files\n2. **Missing error handling** - `catch` blocks that swallow errors, risky operations without try-catch\n3. **Functions without tests** - Cross-reference `src/` with test directories\n4. **Type issues** - `any` types in TypeScript files (`: any`, `as any`)\n5. **Debug artifacts** - `console.log`, `console.debug`, `debugger` statements in non-debug code\n6. **Missing validation** - User input handlers without validation\n\nAlso check recent git activity:\n```bash\n# Unix/macOS\ngit log --oneline -10 2>/dev/null || echo \"No git history\"\n# Windows (PowerShell)\n# git log --oneline -10 2>$null; if ($LASTEXITCODE -ne 0) { echo \"No git history\" }\n```\n\n### Present Suggestions\n\nFrom your analysis, present 3-4 specific suggestions:\n\n```\n## Task Suggestions\n\nBased on scanning your codebase, here are some good starter tasks:\n\n**1. [Most promising task]**\n Location: `src/path/to/file.ts:42`\n Scope: ~1-2 files, ~20-30 lines\n Why it's good: [brief reason]\n\n**2. [Second task]**\n Location: `src/another/file.ts`\n Scope: ~1 file, ~15 lines\n Why it's good: [brief reason]\n\n**3. [Third task]**\n Location: [location]\n Scope: [estimate]\n Why it's good: [brief reason]\n\n**4. Something else?**\n Tell me what you'd like to work on.\n\nWhich task interests you? (Pick a number or describe your own)\n```\n\n**If nothing found:** Fall back to asking what the user wants to build:\n> I didn't find obvious quick wins in your codebase. What's something small you've been meaning to add or fix?\n\n### Scope Guardrail\n\nIf the user picks or describes something too large (major feature, multi-day work):\n\n```\nThat's a valuable task, but it's probably larger than ideal for your first OpenSpec run-through.\n\nFor learning the workflow, smaller is better—it lets you see the full cycle without getting stuck in implementation details.\n\n**Options:**\n1. **Slice it smaller** - What's the smallest useful piece of [their task]? Maybe just [specific slice]?\n2. **Pick something else** - One of the other suggestions, or a different small task?\n3. **Do it anyway** - If you really want to tackle this, we can. Just know it'll take longer.\n\nWhat would you prefer?\n```\n\nLet the user override if they insist—this is a soft guardrail.\n\n---\n\n## Phase 3: Explore Demo\n\nOnce a task is selected, briefly demonstrate explore mode:\n\n```\nBefore we create a change, let me quickly show you **explore mode**—it's how you think through problems before committing to a direction.\n```\n\nSpend 1-2 minutes investigating the relevant code:\n- Read the file(s) involved\n- Draw a quick ASCII diagram if it helps\n- Note any considerations\n\n```\n## Quick Exploration\n\n[Your brief analysis—what you found, any considerations]\n\n┌─────────────────────────────────────────┐\n│ [Optional: ASCII diagram if helpful] │\n└─────────────────────────────────────────┘\n\nExplore mode (`/opsx:explore`) is for this kind of thinking—investigating before implementing. You can use it anytime you need to think through a problem.\n\nNow let's create a change to hold our work.\n```\n\n**PAUSE** - Wait for user acknowledgment before proceeding.\n\n---\n\n## Phase 4: Create the Change\n\n**EXPLAIN:**\n```\n## Creating a Change\n\nA \"change\" in OpenSpec is a container for all the thinking and planning around a piece of work. It lives in `openspec/changes/<name>/` and holds your artifacts—proposal, specs, design, tasks.\n\nLet me create one for our task.\n```\n\n**DO:** Create the change with a derived kebab-case name:\n```bash\nopenspec new change \"<derived-name>\"\n```\n\n**SHOW:**\n```\nCreated: `openspec/changes/<name>/`\n\nThe folder structure:\n```\nopenspec/changes/<name>/\n├── proposal.md ← Why we're doing this (empty, we'll fill it)\n├── design.md ← How we'll build it (empty)\n├── specs/ ← Detailed requirements (empty)\n└── tasks.md ← Implementation checklist (empty)\n```\n\nNow let's fill in the first artifact—the proposal.\n```\n\n---\n\n## Phase 5: Proposal\n\n**EXPLAIN:**\n```\n## The Proposal\n\nThe proposal captures **why** we're making this change and **what** it involves at a high level. It's the \"elevator pitch\" for the work.\n\nI'll draft one based on our task.\n```\n\n**DO:** Draft the proposal content (don't save yet):\n\n```\nHere's a draft proposal:\n\n---\n\n## Why\n\n[1-2 sentences explaining the problem/opportunity]\n\n## What Changes\n\n[Bullet points of what will be different]\n\n## Capabilities\n\n### New Capabilities\n- `<capability-name>`: [brief description]\n\n### Modified Capabilities\n\n\n## Impact\n\n- `src/path/to/file.ts`: [what changes]\n- [other files if applicable]\n\n---\n\nDoes this capture the intent? I can adjust before we save it.\n```\n\n**PAUSE** - Wait for user approval/feedback.\n\nAfter approval, save the proposal:\n```bash\nopenspec instructions proposal --change \"<name>\" --json\n```\nThen write the content to `openspec/changes/<name>/proposal.md`.\n\n```\nProposal saved. This is your \"why\" document—you can always come back and refine it as understanding evolves.\n\nNext up: specs.\n```\n\n---\n\n## Phase 6: Specs\n\n**EXPLAIN:**\n```\n## Specs\n\nSpecs define **what** we're building in precise, testable terms. They use a requirement/scenario format that makes expected behavior crystal clear.\n\nFor a small task like this, we might only need one spec file.\n```\n\n**DO:** Create the spec file:\n```bash\n# Unix/macOS\nmkdir -p openspec/changes/<name>/specs/<capability-name>\n# Windows (PowerShell)\n# New-Item -ItemType Directory -Force -Path \"openspec/changes/<name>/specs/<capability-name>\"\n```\n\nDraft the spec content:\n\n```\nHere's the spec:\n\n---\n\n## ADDED Requirements\n\n### Requirement: <Name>\n\n<Description of what the system should do>\n\n#### Scenario: <Scenario name>\n\n- **WHEN** <trigger condition>\n- **THEN** <expected outcome>\n- **AND** <additional outcome if needed>\n\n---\n\nThis format—WHEN/THEN/AND—makes requirements testable. You can literally read them as test cases.\n```\n\nSave to `openspec/changes/<name>/specs/<capability>/spec.md`.\n\n---\n\n## Phase 7: Design\n\n**EXPLAIN:**\n```\n## Design\n\nThe design captures **how** we'll build it—technical decisions, tradeoffs, approach.\n\nFor small changes, this might be brief. That's fine—not every change needs deep design discussion.\n```\n\n**DO:** Draft design.md:\n\n```\nHere's the design:\n\n---\n\n## Context\n\n[Brief context about the current state]\n\n## Goals / Non-Goals\n\n**Goals:**\n- [What we're trying to achieve]\n\n**Non-Goals:**\n- [What's explicitly out of scope]\n\n## Decisions\n\n### Decision 1: [Key decision]\n\n[Explanation of approach and rationale]\n\n---\n\nFor a small task, this captures the key decisions without over-engineering.\n```\n\nSave to `openspec/changes/<name>/design.md`.\n\n---\n\n## Phase 8: Tasks\n\n**EXPLAIN:**\n```\n## Tasks\n\nFinally, we break the work into implementation tasks—checkboxes that drive the apply phase.\n\nThese should be small, clear, and in logical order.\n```\n\n**DO:** Generate tasks based on specs and design:\n\n```\nHere are the implementation tasks:\n\n---\n\n## 1. [Category or file]\n\n- [ ] 1.1 [Specific task]\n- [ ] 1.2 [Specific task]\n\n## 2. Verify\n\n- [ ] 2.1 [Verification step]\n\n---\n\nEach checkbox becomes a unit of work in the apply phase. Ready to implement?\n```\n\n**PAUSE** - Wait for user to confirm they're ready to implement.\n\nSave to `openspec/changes/<name>/tasks.md`.\n\n---\n\n## Phase 9: Apply (Implementation)\n\n**EXPLAIN:**\n```\n## Implementation\n\nNow we implement each task, checking them off as we go. I'll announce each one and occasionally note how the specs/design informed the approach.\n```\n\n**DO:** For each task:\n\n1. Announce: \"Working on task N: [description]\"\n2. Implement the change in the codebase\n3. Reference specs/design naturally: \"The spec says X, so I'm doing Y\"\n4. Mark complete in tasks.md: `- [ ]` → `- [x]`\n5. Brief status: \"✓ Task N complete\"\n\nKeep narration light—don't over-explain every line of code.\n\nAfter all tasks:\n\n```\n## Implementation Complete\n\nAll tasks done:\n- [x] Task 1\n- [x] Task 2\n- [x] ...\n\nThe change is implemented! One more step—let's archive it.\n```\n\n---\n\n## Phase 10: Archive\n\n**EXPLAIN:**\n```\n## Archiving\n\nWhen a change is complete, we archive it. This moves it from `openspec/changes/` to `openspec/changes/archive/YYYY-MM-DD-<name>/`.\n\nArchived changes become your project's decision history—you can always find them later to understand why something was built a certain way.\n```\n\n**DO:**\n```bash\nopenspec archive \"<name>\"\n```\n\n**SHOW:**\n```\nArchived to: `openspec/changes/archive/YYYY-MM-DD-<name>/`\n\nThe change is now part of your project's history. The code is in your codebase, the decision record is preserved.\n```\n\n---\n\n## Phase 11: Recap & Next Steps\n\n```\n## Congratulations!\n\nYou just completed a full OpenSpec cycle:\n\n1. **Explore** - Thought through the problem\n2. **New** - Created a change container\n3. **Proposal** - Captured WHY\n4. **Specs** - Defined WHAT in detail\n5. **Design** - Decided HOW\n6. **Tasks** - Broke it into steps\n7. **Apply** - Implemented the work\n8. **Archive** - Preserved the record\n\nThis same rhythm works for any size change—a small fix or a major feature.\n\n---\n\n## Command Reference\n\n**Core workflow:**\n\n| Command | What it does |\n|---------|--------------|\n| `/opsx:propose` | Create a change and generate all artifacts |\n| `/opsx:explore` | Think through problems before/during work |\n| `/opsx:apply` | Implement tasks from a change |\n| `/opsx:archive` | Archive a completed change |\n\n**Additional commands:**\n\n| Command | What it does |\n|---------|--------------|\n| `/opsx:new` | Start a new change, step through artifacts one at a time |\n| `/opsx:continue` | Continue working on an existing change |\n| `/opsx:ff` | Fast-forward: create all artifacts at once |\n| `/opsx:verify` | Verify implementation matches artifacts |\n\n---\n\n## What's Next?\n\nTry `/opsx:propose` on something you actually want to build. You've got the rhythm now!\n```\n\n---\n\n## Graceful Exit Handling\n\n### User wants to stop mid-way\n\nIf the user says they need to stop, want to pause, or seem disengaged:\n\n```\nNo problem! Your change is saved at `openspec/changes/<name>/`.\n\nTo pick up where we left off later:\n- `/opsx:continue <name>` - Resume artifact creation\n- `/opsx:apply <name>` - Jump to implementation (if tasks exist)\n\nThe work won't be lost. Come back whenever you're ready.\n```\n\nExit gracefully without pressure.\n\n### User just wants command reference\n\nIf the user says they just want to see the commands or skip the tutorial:\n\n```\n## OpenSpec Quick Reference\n\n**Core workflow:**\n\n| Command | What it does |\n|---------|--------------|\n| `/opsx:propose <name>` | Create a change and generate all artifacts |\n| `/opsx:explore` | Think through problems (no code changes) |\n| `/opsx:apply <name>` | Implement tasks |\n| `/opsx:archive <name>` | Archive when done |\n\n**Additional commands:**\n\n| Command | What it does |\n|---------|--------------|\n| `/opsx:new <name>` | Start a new change, step by step |\n| `/opsx:continue <name>` | Continue an existing change |\n| `/opsx:ff <name>` | Fast-forward: all artifacts at once |\n| `/opsx:verify <name>` | Verify implementation |\n\nTry `/opsx:propose` to start your first change.\n```\n\nExit gracefully.\n\n---\n\n## Guardrails\n\n- **Follow the EXPLAIN → DO → SHOW → PAUSE pattern** at key transitions (after explore, after proposal draft, after tasks, after archive)\n- **Keep narration light** during implementation—teach without lecturing\n- **Don't skip phases** even if the change is small—the goal is teaching the workflow\n- **Pause for acknowledgment** at marked points, but don't over-pause\n- **Handle exits gracefully**—never pressure the user to continue\n- **Use real codebase tasks**—don't simulate or use fake examples\n- **Adjust scope gently**—guide toward smaller tasks but respect user choice", "variables": [], "notes": "Guided onboarding - walk through a complete OpenSpec workflow cycle with narration", "metadata": { "source": { "provider": "github-windsurf-workflows", "repository": "https://github.com/zh-impact/restitute.js", "path": ".windsurf/workflows/opsx-onboard.md", "ref": "64edcda0bfb89da7b9f792d0455a4bd84fac4532", "url": "https://github.com/zh-impact/restitute.js/blob/64edcda0bfb89da7b9f792d0455a4bd84fac4532/.windsurf/workflows/opsx-onboard.md", "key": "zh-impact/restitute.js/.windsurf/workflows/opsx-onboard.md" } } }

OPSX: Onboard

About

Preflight

Phase 1: Welcome

Phase 2: Task Selection

Codebase Analysis

Present Suggestions

Scope Guardrail

Phase 3: Explore Demo

Phase 4: Create the Change

Phase 5: Proposal

Phase 6: Specs

Phase 7: Design

Phase 8: Tasks

Phase 9: Apply (Implementation)

Phase 10: Archive

Phase 11: Recap & Next Steps

Graceful Exit Handling

User wants to stop mid-way

User just wants command reference

Guardrails

Install OPSX: Onboard and it becomes one more candidate the router can pick - when it fits.

Use it

Manifest

Reviews