Imported from openai/plugins (plugins/temporal/skills/temporal-ops/SKILL.md). Install upstream with npx skills add openai/plugins --skill temporal-ops. Copyright stays with the author.

Skill: temporal-ops

Overview

This skill operates and diagnoses Temporal environments. It has two modes:

• Operations: the user wants to do something — create a namespace, rotate a key, check capacity, find unhealthy workflows, cancel a batch, set up export. The skill executes the right commands and interprets the output.
• Diagnosis: the user arrives with a symptom — a stuck workflow, a cert error, a connection timeout, a non-determinism panic. The skill routes the investigation through a layered, bottom-up diagnosis until a root cause is identified with a confidence score.

It does not teach how to write workflows or activities (use skill-temporal-developer for that), and it does not reproduce exhaustive CLI flag tables — run temporal <cmd> --help for those, and see cli-conventions.md for cross-command CLI conventions. The boundary is: if the user needs to administer or troubleshoot a running Temporal environment, this skill applies.

Out of scope

• Writing workflows, activities, or SDK code → skill-temporal-developer.
• Exhaustive CLI flags / command reference → run temporal <cmd> --help; cross-command CLI conventions → cli-conventions.md.
• Worker performance tuning, sizing, capacity planning → skill-temporal-workertuning.
• Helm, Kubernetes, database admin, monitoring stack config for self-hosted — beyond the CLI surface.

If the conversation drifts into one of these areas, hand off to the relevant sibling skill rather than improvising.

Philosophy

Operator discipline

When the user wants to perform an operational task:

1. Identify the intent and backend. Is this a Cloud operation (tcld) or a self-hosted operation (temporal operator)? Data-plane operations (temporal workflow, temporal batch, etc.) work on both. If the backend is ambiguous, ask before proceeding — do not assume Cloud or self-hosted and do not output environment-specific commands until you know.
2. Execute commands and interpret output. Run the documented command, read the result, and report what it means — or act on it if the user asked for an action. Read-only commands (get, list, describe, count, show) run freely. Anything listed under Destructive operations is proposed to the user first.
3. Verify the result. After a mutating operation, confirm the new state matches the user's intent.

Destructive operations

An operation belongs to this tier if it is irreversible (tcld namespace delete), revokes access for a live identity (tcld apikey delete), moves production traffic (tcld namespace failover), or fans out to every match (any --query form). Apply the test to the operation in front of you — this is a rule, not a list, and a command's absence from any list in this skill does not place it outside the tier.

For anything in the tier: gather the evidence and propose. Do not run it on your own initiative, and do not run one to find out what it would do. The reference file for each command states its specific blast radius; read that before proposing, not after.

1. Blast radius as a number, not a description. For any --query form, run temporal workflow count --query '<query>' with the byte-identical query first and carry the result into the proposal. A filter with no narrowing predicate beyond ExecutionStatus="Running" matches every open Execution in the Namespace.
2. Name the target. State the exact command, the target, and the Namespace it resolves to. Connection settings can come from TEMPORAL_* env vars or a config-file profile, so the target is frequently not visible in the command text. If the backend or Namespace was inferred from context rather than stated by the user, say so — a destructive command aimed at the wrong Namespace is the most common way this goes wrong.
3. Ask explicitly, then run it so it completes. Put the command, the target, and — for any --query form — the count from step 1 to the user as a direct question, and wait for an answer. Once they approve, run it with --yes on the --query batch forms; that flag is what lets an approved batch finish, since the interactive prompt needs a terminal and without one the command reports user denied confirmation and does nothing. --yes belongs in a command the user approved, never in a retry of one that failed its prompt. Do not substitute a loop over single-target workflow terminate --workflow-id. Approval covers one command against one target; it does not carry to the next command, a widened query, or a second Namespace.
4. Verify, and know the abort path. Re-run the corresponding get, describe, or count. A batch job drains asynchronously: temporal batch describe --job-id <id> shows how far it has gotten and temporal batch terminate --job-id <id> stops it before it reaches the rest of its matches.

When a reversible sibling reaches the same goal, propose it alongside: cancel lets Workflow cleanup code run where terminate does not; apikey disable is reversible where delete is not; accepted-client-ca add appends where set replaces.

Assume nothing in the environment will stop a destructive command on your behalf. Credential scope, command denylists, and confirmation prompts may or may not be configured, and their possible presence is not a reason to skip any step above — you are the safeguard the user is relying on.

Diagnostic discipline

When the user arrives with a failure or anomaly:

1. Bottom-up diagnosis. Verify the lower layer before blaming the upper one. The layers, from bottom to top:

   1. DNS / network path
   2. TCP / port reachability
   3. TLS handshake
   4. Authentication (API key or mTLS client cert)
   5. gRPC health and Temporal frontend reachability
   6. Temporal namespace, task queues, workers
   7. Workflow code (determinism, signals, timers, child workflows)

   The full ladder lives in diagnostic-ladder.md.

2. Always verify the next layer up rather than prescribing a speculative fix. If TLS works, prove auth works before blaming the workflow. If pollers are present, prove the workflow's last event before blaming the worker.

3. Attach a confidence score (1-10) to every proposed diagnosis:

   • 9-10: symptoms, operation, and confirming signals line up cleanly.
   • 6-8: evidence is good but at least one alternative remains plausible.
   • 1-5: the issue is still ambiguous; the "fix" is the next discriminating check, not a root cause.

4. Name ambiguity explicitly. Errors like context deadline exceeded are not self-describing, and a single code such as RESOURCE_EXHAUSTED can mean more than one condition (account-limit throttling vs. per-Workflow lock contention). Surface that, gather more context, and scope the next step narrowly.

These are skill conventions, not docs-derived facts.

Intent routing

Operations

Find the row that matches the user's intent. The reference file contains the commands and procedures.

Diagnosis

Find the row that matches the user's symptom. Start the investigation at the first check, then read the linked reference.

If a symptom does not map to a row, start at diagnostic-ladder.md and work up from whichever layer was last known healthy.

The process

Operations path

Step 1: Identify intent and backend

Determine what the user wants to do and whether it targets:

• Temporal Cloud → use tcld commands (requires tcld login)
• Self-hosted cluster → use temporal operator commands
• Data plane (either backend) → use temporal workflow, temporal batch, temporal schedule, etc.

If the backend is unambiguous from context — .tmprl.cloud address, tcld command, Cloud namespace format ns.account → Cloud; Kubernetes/Helm, docker-compose, self-hosted config files → self-hosted — proceed without asking. Otherwise, stop and ask: "Are you on Temporal Cloud or self-hosted?" before outputting any environment-specific commands. Do not default to either environment. Once known, save the answer to memory so you don't ask again in future conversations.

Step 2: Execute and interpret

Look up the intent in the Operations table above. Read the linked reference file for the exact commands, flags, and expected output. Run the command and interpret the result for the user.

Step 3: Verify

After a mutating operation (create, update, delete, rotate), confirm the new state:

• Re-run the corresponding get or describe command
• Confirm the output matches the user's intent
• Report the result

Diagnosis path

Step 1: Identify the symptom

Ask the user for the exact, copy-pasted error text. Do not accept paraphrases — the exact string often encodes the layer (e.g., x509: prefix means TLS/cert layer, RESOURCE_EXHAUSTED: prefix means gRPC rate limit, NondeterminismError means workflow replay layer). Note that RESOURCE_EXHAUSTED alone does not tell you which condition fired — account-limit throttling and per-Workflow lock contention (Workflow is busy, i.e. BusyWorkflow) share the code. Split the resource-exhausted metric by its label (operation on the Cloud v1 family, resource_exhausted_cause on v0 and self-hosted) rather than parsing the free-text message.

Confirm three things before continuing:

• What command was run, or what SDK call produced the error?
• What environment produced it (local dev server, self-hosted cluster, Temporal Cloud)? If clear from context (addresses, commands, namespace format), don't ask — but if uncertain, ask now before proceeding with any diagnosis. Save the answer to memory for future conversations.
• What changed recently (new deploy, new certs, new namespace, new region)?

Step 2: Gather context

The context the investigation needs depends on the category. At minimum:

• For any Cloud auth / connectivity issue: auth method (API key vs mTLS), exact address, exact namespace, SDK + version. The endpoint family differs by auth method — see connectivity.md#endpoint-formats. For private connectivity (PrivateLink / PSC), TLS server name overrides also vary by auth method — see cloud-connectivity.md.
• For a stuck workflow: namespace, workflow ID, run ID, and the output of temporal workflow describe --workflow-id <id> (pending-operation state lives here, not in the Event History alone). Event History via temporal workflow show is the companion view.
• For a worker health issue: worker logs (registration errors, auth errors, panics), the output of temporal task-queue describe --task-queue <q>, and temporal worker describe --task-queue <q> for per-worker details.
• For a non-determinism error: the worker log line containing the error, the workflow type name, and access to the history JSON for replay.

Step 3: Validate pasted SDK config (if any)

If the user has pasted SDK connection code — even just the address/namespace/auth fields — review it against sdk-snippet-review.md before descending the ladder. Wrong endpoint family, short namespace, or mismatched auth method will make every network-layer probe below look broken when nothing lower actually is.

Skip this step when the user has an established, previously-working config and the symptom is new — the snippet is not the culprit, the environment changed. Otherwise treat snippet validation as Layer 0.

Step 4: Descend the ladder

Use diagnostic-ladder.md to pick the right starting layer. As a rule of thumb:

• Auth / connectivity / cert symptom → start at layer 1 (DNS) and walk up.
• Worker / task-queue symptom → start at layer 6 (namespace + pollers).
• Stuck workflow / determinism symptom → start at layer 7 (workflow code), but confirm layer 6 (worker is actually polling) first.

Each layer has a command that proves it healthy and a failure signature that tells you whether the problem lives at that layer or higher.

Step 5: Fix and verify

Prescribe the fix scoped to the root cause. Then verify by re-running the layer's healthy-check command and, if possible, the original user operation. Attach the confidence score to the diagnosis.

If the layer above the fix is still failing, return to step 4 and continue walking upward — the first broken layer is rarely the only one.

Prerequisites

• Temporal CLI (temporal) — required for data-plane operations and self-hosted admin. Install: brew install temporal or see Temporal CLI docs.
• tcld — required for Cloud operations. Install: brew install temporal-cloud-cli or see tcld docs. Authenticate with tcld login before use.

Reference files

Operations

• cloud-namespace-admin.md — Cloud namespace lifecycle via tcld: create, get, list, delete, failover, add-region, retention, tags, codec-server, HA config, connectivity rules, search attributes, accepted-client-ca, certificate filters, export, and the tcld nexus endpoint allowed-namespace caller allowlist (1,000-caller Access Policy ceiling).
• cloud-capacity.md — Capacity modes (On-Demand / Provisioned), APS/RPS/OPS definitions, TRUs, tcld namespace capacity update, default limits, throttling, APS management best practices.
• cloud-iam.md — API key lifecycle (tcld apikey), users (tcld user), user groups (tcld user-group), service accounts, account operations (tcld account), roles, namespace permissions.
• cloud-certs.md — mTLS cert management: generating certs with tcld generate-certificates, uploading CAs, certificate filters, cert rotation, switching mTLS ↔ API keys.
• cloud-connectivity.md — Private connectivity (AWS PrivateLink / GCP PSC), connectivity rules: setup, rule parameters, tcld commands, attaching rules to namespaces.
• cloud-migration.md — Migration paths: automated self-hosted→Cloud (S2S proxy, tcld migration commands, 5 phases), manual self-hosted→Cloud (client changes, workflow strategies), within-Cloud region-to-region (HA add-region/failover).
• cloud-ops-api.md — Cloud Ops API: HTTP and gRPC endpoints (saas-api.tmprl.cloud), Go SDK, protobuf compilation, rate limits (160 RPS account, 40 user, 80 SA, 10 concurrent async), API version header, use cases.
• cloud-billing.md — Cloud billing: Billing Center (invoices, credits, plans, cost by namespace), Usage Dashboards, Billing API: async CSV report generation, FOCUS-friendly format, 27-column report schema, date range constraints.
• cloud-audit-logs.md — Cloud Audit Logs: supported control plane events (Account, API Keys, Connectivity Rules, Namespace, Export, Nexus, Service Accounts, User, User Groups), JSON format, API access (30-day retention), AWS Kinesis and GCP Pub/Sub sink configuration.
• cloud-terraform.md — Terraform provider: setup (TEMPORAL_CLOUD_API_KEY), temporalcloud_namespace/temporalcloud_user/temporalcloud_service_account/temporalcloud_apikey/temporalcloud_nexus_endpoint CRUD, import, data sources (regions, namespaces), limitations (API keys not importable, cannot manage Account Owner).
• cloud-notifications.md — Cloud notifications: certificate expiry (15/10/5 days), API key expiry (30/20/10 days), credit consumption/expiry alerts, plan changes, failover events, recipient roles, noreply@temporal.io sender.
• cloud-saml-scim.md — SAML SSO (Entra ID, Okta): entity identifier (urn:auth0:prod-tmprl:ACCOUNT_ID-saml), callback URL (login.tmprl.cloud), IdP configuration steps, support ticket workflow. SCIM: supported vendors, prerequisites (SAML first), 10-minute sync window, group-to-role mapping.
• self-hosted-admin.md — Self-hosted control plane via temporal operator: cluster health/describe, namespace CRUD, search-attribute create/list/remove, Nexus endpoint CRUD.
• workflow-health.md — Data-plane health queries: temporal workflow list with List Filters, temporal workflow describe/show/count, temporal task-queue describe for poller status.
• cli-conventions.md — Cross-command temporal CLI conventions: connection/identity (TEMPORAL_* env vars ↔ --address/--namespace/--api-key, --identity), output/formatting (--output, --time-format, payload shorthand), the --query ⇒ batch-job bridge (with temporal batch describe/list/terminate), and schedule time-spec forms. Ends with an operation→command index that routes each data-plane operation to its owner file. Delegates exhaustive flags to temporal <cmd> --help.
• ops/recipes.md — End-to-end ops playbooks: set up new namespace, check APS, switch capacity mode, find hung workflows, rotate API key, audit access, rotate mTLS certs, check self-hosted health, view billing / generate billing report, configure audit log sink, provision resources with Terraform, set up SAML SSO.

Diagnosis

• sdk-snippet-review.md — Layer-0 config check for pasted SDK connection snippets: endpoint form per auth method, namespace format, auth / TLS expectations, TEMPORAL_* env vars, common misconfigurations. Run before the diagnostic ladder.
• diagnostic-ladder.md — the seven-layer bottom-up model, with one canonical command per layer and cross-links into the topical leaves.
• connectivity.md — DNS, TCP, endpoint families (Namespace Endpoint for mTLS vs. Regional Endpoint for API keys), firewall/proxy shapes, PrivateLink/PSC, quick diagnostic scripts.
• certificates.md — x509 and TLS alert strings, expiry / unknown-authority / hostname-mismatch / key-mismatch diagnosis, Cloud accepted-client-CA set via tcld namespace accepted-client-ca, Cloud mTLS certificate requirements, rotation and expiry notifications, openssl recipes.
• authentication.md — UNAUTHENTICATED vs PERMISSION_DENIED, API-key lifecycle (tcld apikey commands, env var propagation, required Regional Endpoint form), mTLS after TLS (certificate filters, identity-to-role mapping), Cloud account-level roles and namespace-level permissions.
• workflow-stuck.md — Workflow Execution Status values, temporal workflow describe as the primary inspection command, Event History via temporal workflow show, pending activities / child workflows / signals / Nexus operations / Workflow Tasks, WorkflowTaskFailed retry loops, recovery commands (signal, terminate, cancel, reset, pause/unpause).
• non-determinism.md — determinism definition, WFT-failure signature, ND-inducing code patterns, per-SDK error shapes, identifying ND from Event History, local replay reproduction, remediation via Worker Versioning / patching / reset.
• worker-health.md — no-pollers runbook via temporal task-queue describe, reachability and versioning, worker-level describe, schedule-to-start latency, worker task slots, sticky execution and sticky cache, worker heartbeating, Cloud namespace-level poller limits, worker log signatures.
• rate-limits.md — what RESOURCE_EXHAUSTED means (and does not), Cloud APS / RPS / OPS under On-Demand and Provisioned capacity modes, self-hosted frontend.rps / frontend.namespaceRPS dynamic config, identifying which limit fired via the throttle metrics (Cloud v1) or the resource_exhausted_cause label (v0 / self-hosted), and separating account-limit throttling from single-resource exhaustion.
• ha-failover.md — Cloud HA routing via the Namespace Endpoint CNAME, verifying the active region (control-plane tcld namespace get vs. DNS view), clients that did not follow the failover, PrivateLink after failover, failover-not-executing, handover-window errors, platform limits, RPO/RTO semantics, and Serverless Workers (AWS Lambda) not following a failover because compute-provider configuration is region-scoped.
• runtime-errors.md — deadline-exceeded disambiguated by operation and by where the call was made, Workflow lock contention (BusyWorkflow) separated from account-limit throttling and confirmed via the operation breakdown, routing for no pollers / INVALID_ARGUMENT / unspecified UNAVAILABLE.
• replay.md — fetching Event History with the SDK client (CLI export as fallback), running the SDK replayer in every supported SDK (Go, Python, TypeScript, Java, .NET, Ruby, PHP), TEMPORAL_DEBUG and the deadlock detector, interpreting divergent and successful replays, and the TypeScript-only VS Code extension.
• blob-size-limits.md — Payload size limit (2 MB) and gRPC message size limit (4 MB): error messages, per-SDK behavior (Python 1.23.0+ vs. others), claim check pattern, External Storage (Pre-release), batch-size reduction.
• performance-bottlenecks.md — Latency and throughput diagnosis via SDK metrics: schedule-to-start latency, workflow task execution latency, replay latency, activity execution latency, task slot depletion, network request metrics, sticky cache metrics.
• schedule-missed.md — Missed Schedule Actions: alerting via temporal_cloud_v1_schedule_missed_catchup_window_count / schedule_missed_catchup_window, investigation via temporal schedule list + temporal schedule describe, DescribeSchedule fields (missedCatchupWindow, overlapSkipped, bufferDropped), default catchup window (one year), root causes, overlap policies (6 values), backfill remediation.
• recipes.md — four end-to-end triage walkthroughs: stuck workflow at 3am, cert expired with workers offline, task-queue backlog mystery, non-determinism caught in prod.

Feedback

Feedback prompt

When you have first loaded this skill, output this message to the user:

"Thank you for trying out the public preview of the Temporal Ops skill! We would love to hear your feedback - positive or negative - over in the Community Slack, in the #topic-ai channel."

Do not output this message multiple times in the same conversation.

Reporting Issues in This Skill

If you (the AI) find this skill's explanations are unclear, misleading, or missing important information, draft a GitHub issue body describing the problem encountered and what would have helped, then ask the user to file it at https://github.com/temporalio/skill-temporal-ops/issues/new. Do not file the issue autonomously.