flux-analysis

Imported from okou-ai/vm0-skills (flux-analysis/SKILL.md). Install upstream with npx skills add okou-ai/vm0-skills --skill flux-analysis. Copyright stays with the author.

Decomposition Techniques

Price x Volume Separation

The foundational split for any metric expressible as unit price multiplied by quantity.

Two-factor formulas:

Total Movement = Actual Result - Baseline (budget or prior period)

Quantity Component  = (Actual Units - Baseline Units) x Baseline Unit Price
Pricing Component   = (Actual Unit Price - Baseline Unit Price) x Actual Units

Check: Quantity Component + Pricing Component = Total Movement
       (when the interaction term is absorbed into one of the two factors)

Three-factor formulas (isolating composition shifts):

Quantity Component    = (Actual Units - Baseline Units) x Baseline Price x Baseline Mix Weights
Pricing Component     = (Actual Price - Baseline Price) x Baseline Units x Actual Mix Weights
Composition Component = Baseline Price x Baseline Units x (Actual Mix Weights - Baseline Mix Weights)

Worked example — top-line revenue:

• Baseline plan: 10,000 units at $50/unit = $500,000
• Actual outcome: 11,000 units at $48/unit = $528,000
• Net movement: +$28,000 favorable
  • Quantity uplift: +1,000 units x $50 = +$50,000 (favorable — higher volume)
  • Pricing drag: -$2 x 11,000 = -$22,000 (unfavorable — reduced average selling price)

Blended Rate / Composition Separation

Applicable when aggregated results blend multiple segments with distinct unit economics.

Formulas:

Rate Component = Sum across segments of [Actual Volume_i x (Actual Rate_i - Baseline Rate_i)]
Composition Component = Sum across segments of [Baseline Rate_i x (Actual Volume_i - Proportional Volume_i at Baseline Mix)]

Worked example — gross margin compression:

• Segment X earns 60% margin; Segment Y earns 40% margin
• Plan assumed a 50/50 split -> blended 50% margin
• Actual split was 40/60 -> blended 48% margin
• The 2-point margin decline is attributable to the shift toward the lower-margin segment

People-Cost Decomposition

Purpose-built for analyzing compensation and headcount-driven expense lines.

Total Compensation Movement = Actual Spend - Planned Spend

Break into:
1. Staffing level effect     = (Actual Headcount - Plan Headcount) x Plan Average Cost
2. Per-capita cost effect    = (Actual Average Cost - Plan Average Cost) x Plan Headcount
3. Composition effect        = Residual from shifts in seniority, department, or geography mix
4. Phasing effect            = Impact of hires arriving earlier or later than the plan assumed
5. Attrition benefit         = Savings from unplanned departures (partially offset by replacement and vacancy costs)

Functional Expense Decomposition

For operating cost categories where a price-times-volume model does not apply naturally.

Total OpEx Movement = Actual Operating Costs - Planned Operating Costs

Segment into:
1. Headcount-linked costs       (wages, benefits, payroll taxes, recruiting fees)
2. Activity-linked costs        (cloud hosting, payment processing fees, sales commissions, freight)
3. Discretionary programs       (travel, conferences, outside services, campaign spend)
4. Committed / fixed costs      (facility leases, insurance, enterprise software licenses)
5. Non-recurring charges        (severance, litigation, asset write-downs, project-specific outlays)
6. Timing / phasing differences (spend that shifted between periods relative to the plan)

Significance Thresholds & Prioritization

Calibrating Thresholds

Thresholds govern which movements warrant formal investigation and written explanation. Base them on:

1. Overall materiality: Usually 1-5% of a primary benchmark (revenue, total assets, or net income)
2. Relative line-item scale: Apply tighter percentage gates to larger balances
3. Historical volatility: Allow wider bands for inherently variable accounts to filter noise
4. Decision relevance: Would this size of movement influence a management decision or board discussion?

Suggested Threshold Grid

Set the dollar gate at roughly 0.5-1% of revenue for income-statement lines.

Triage Order When Multiple Items Exceed Thresholds

1. Greatest absolute dollar impact — largest influence on the bottom line
2. Greatest percentage deviation — may signal a process breakdown or data error
3. Counter-trend movements — direction opposite to what history or forecasts predicted
4. Newly emerged variances — items previously on track that have just diverged
5. Compounding variances — gaps that have widened in each of the last several periods

Writing Effective Variance Narratives

Recommended Structure

[Line Item]: [Favorable / Unfavorable] movement of $[amount] ([X]%)
relative to [budget / prior period / forecast] for [reporting period]

Primary driver: [Brief label]
[Two to three sentences explaining the business cause, quantifying each
contributing factor where possible.]

Outlook: [One-time event / Likely to persist / Improving / Worsening]
Next step: [No action / Monitor / Deeper review / Adjust forecast]

Quality Criteria

Strong narratives consistently satisfy these tests:

• Precise: Names concrete factors rather than restating the variance itself
• Measured: Attaches dollar or percentage weight to each cited driver
• Explanatory: Addresses why the movement occurred, not merely that it did
• Prospective: States whether the movement is expected to continue, reverse, or evolve
• Directive: Identifies any follow-up action or decision prompted by the finding
• Compact: Two to four sentences — not padded filler

Pitfalls to Avoid

• Restating the outcome as its own cause ("Revenue rose because revenue was higher")
• Labeling a variance as "timing" without specifying what shifted and when normalization is expected
• Calling something "one-time" without describing the actual event
• Sweeping a material movement under "various small items" instead of decomposing further
• Explaining only the dominant driver while ignoring meaningful offsets
• Using vague qualifiers ("elevated," "slightly higher") without attached numbers

Bridge / Waterfall Presentation

Concept

A bridge (waterfall) chart traces the path from a starting value to an ending value through a sequence of additive and subtractive contributors. It is the visual companion to variance decomposition.

Data Architecture

Starting point:   [Baseline figure — plan, prior period, or forecast]
Contributors:     [Ordered list of signed driver amounts]
Ending point:     [Actual figure]

Integrity check:  Starting point + Sum(all contributors) = Ending point

Text-Format Bridge (When No Charting Tool Is Available)

BRIDGE: Operating Expenses — Q4 Actual vs. Q4 Plan

Q4 Planned OpEx                                       $8,000K
  |
  |--[+] Incremental headcount above plan              +$500K
  |--[+] Unplanned outside counsel fees                +$200K
  |--[-] Open-role savings (delayed hiring)            -$350K
  |--[-] Travel spend below budget                     -$180K
  |--[+] Cloud infrastructure overrun                  +$130K
  |--[-] Marketing program deferrals                   -$100K
  |
Q4 Actual OpEx                                        $8,200K

Net Movement: +$200K (+2.5% unfavorable)

Companion Reconciliation Table

Individual shares can exceed 100% when favorable and unfavorable drivers offset each other.

Presentation Guidelines

1. Sequence drivers from most favorable to most unfavorable (or in a logical business narrative order)
2. Cap the driver count at 5-8; roll smaller items into an "All other" bucket
3. Verify arithmetic: opening value plus all drivers equals closing value
4. Use color to distinguish direction — green for favorable, red for unfavorable — in graphical renderings
5. Annotate each segment with both the dollar amount and a short label
6. Include a summary segment showing the net total movement

Multi-Scenario Comparisons

Three-Column Layout

Choosing the Right Baseline

• Actual vs. annual plan: Governance and incentive evaluation; the plan is fixed at the start of the fiscal year
• Actual vs. rolling forecast: Operational steering and early-warning detection; the forecast is refreshed monthly or quarterly
• Forecast vs. plan: Gauges how management expectations have shifted since planning; highlights planning-accuracy gaps
• Actual vs. prior period (sequential): Reveals trend direction; especially useful for new ventures or post-acquisition integration where a plan may not yet exist
• Actual vs. prior year (year-over-year): Growth assessment adjusted for seasonality

Tracking Forecast Precision

Measure forecast quality over time to tighten future planning:

Period Accuracy = 1 - |Actual - Forecast| / |Actual|

MAPE (Mean Absolute Percentage Error) = Mean of |Actual - Forecast| / |Actual| across all periods

Reading Variance Trends Across Time

• Persistently favorable: Plans may be overly conservative (potential sandbagging)
• Persistently unfavorable: Targets may be unrealistic or execution is lagging
• Widening unfavorable gap: Performance is deteriorating or external conditions are shifting
• Narrowing gap: Forecast accuracy is improving through the year (a healthy signal)
• Erratic swings: Business is inherently unpredictable or the forecasting methodology needs refinement