Imported from mirrorworld-universe/forgex-cli (SKILL.md). Install upstream with npx skills add mirrorworld-universe/forgex-cli. Copyright stays with the author.

ForgeX CLI

Launch tokens. Bundle buy. Manage wallets — Just talk to your agent.

On-chain market making, from a single command line to your OpenClaw agent.No programming required.

⛓️ Supported Platforms

Sonic SVM Solana Pump.fun Raydium Jito Bundle OpenClaw

npm version License: MIT Open Source Jito Bundle Multi-wallet Sonic SVM OpenClaw Native On-chain Market Making

Overview · Quick Start · Configure · Command Reference · Examples

Why ForgeX?

Most on-chain workflows on Solana are painful:

• Too many manual steps. Copy-pasting addresses, switching tabs, signing transaction after transaction — every extra step is a chance to make a costly mistake.
• Repetitive confirmations waste hours. Manually confirming the same operations over and over drains time that should go toward strategy, not execution.
• Complex tools lock out non-developers. If you're not writing custom scripts, most market making tooling is simply inaccessible.

ForgeX packages the full workflow into a clean CLI. One command at a time.

Install

npm install -g forgex-cli

Requires Node.js >= 22.14.0.

Verify installation:

forgex --version

Quick Start (5 minutes)

Step 1 — Initialize config

forgex config init --rpc-url "https://your-rpc-endpoint.com" --network mainnet

Step 2 — Create a wallet group

forgex wallet create-group --name "my-group"
# Returns groupId — note it for subsequent commands

Step 3 — Generate wallets

forgex --password "your-password" wallet generate --group 1 --count 10

Step 4 — Fund your wallets

Distribute SOL from a source wallet to the group:

forgex --password "your-password" transfer out \
  --from "YourSourceWalletAddress" \
  --to-group 1 \
  --value 0.1

Step 5 — Launch a token

forgex --password "your-password" token create \
  --dex pump \
  --name "MyToken" \
  --symbol "MYT" \
  --image ./logo.png \
  --dev-wallet 1 \
  --dev-buy 0.5 \
  --dry-run   # remove --dry-run when ready to go live

Step 6 — Start the volume bot

forgex --password "your-password" tools volume \
  --group 1 \
  --token "TOKEN_MINT_ADDRESS" \
  --mode 1b1s \
  --amount 0.01 \
  --count 10 \
  --rounds 20 \
  --interval 10000

Tip: Always run with --dry-run first to simulate the operation before executing on-chain.

Command Reference

All commands accept --format json|table|minimal (default: json).

Commands involving private keys require --password before the subcommand name:

forgex --password "your-password" <command> [subcommand] [options]

config — Configuration

| Command | Description |

|---|---|

| forgex config init | Initialize config file |

| forgex config set <key> <value> | Set a config value |

| forgex config get [key] | View config values |

# Initialize with RPC endpoint
forgex config init --rpc-url "https://my-rpc.com" --network mainnet

# Set Codex API key for market data
forgex config set codexApiKey "your-api-key"

# Set default slippage (BPS)
forgex config set defaultSlippage 300

# View all config
forgex config get

wallet — Wallet Group Management

Create & manage groups

# Create a local wallet group
forgex wallet create-group --name "market-making-group"

# Create with optional remark
forgex wallet create-group --name "sniper-group" --remark "launch snipers"

# List all wallet groups
forgex wallet list-groups

# View group details (wallet addresses)
forgex wallet group-info --id 1

# Delete a group
forgex wallet delete-group --id 1 --force

Generate & import wallets

# Generate new wallets (max 100 per group)
forgex --password "pwd" wallet generate --group 1 --count 10

# Add an existing wallet by private key
forgex --password "pwd" wallet add --group 1 --private-key "Base58Key..." --note "main wallet"

# Remove a wallet from group
forgex --password "pwd" wallet remove --group 1 --address "WalletAddress..."

# Import from CSV (format: privateKey,note)
forgex --password "pwd" wallet import --group 1 --file ./wallets.csv

Backup & restore

# Export group as CSV
forgex --password "pwd" wallet export --group 1 --file ./backup.csv

# Export all groups as encrypted JSON
forgex --password "pwd" wallet export-group \
  --file ./all-groups.json \
  --encrypt \
  --password "file-encryption-password"

# Import all groups from JSON backup
forgex --password "pwd" wallet import-group \
  --file ./all-groups.json \
  --password "file-encryption-password"

Vanity addresses

# Generate address ending in "pump"
forgex wallet grind --suffix pump

# Generate 3 addresses with custom suffix, using 8 threads
forgex wallet grind --suffix pump --count 3 --threads 8

trade — Trading

All trade commands support --dry-run for simulation.

Buy

# Simulate buy (recommended before first run)
forgex --password "pwd" trade buy \
  --group 1 --token "TOKEN_CA" --amount 0.1 --dry-run

# Batch buy — all wallets in group buy the same amount
forgex --password "pwd" trade buy \
  --group 1 --token "TOKEN_CA" --amount 0.1 --slippage 300

Sell

# Sell all tokens
forgex --password "pwd" trade sell \
  --group 1 --token "TOKEN_CA" --amount all

# Sell 50%
forgex --password "pwd" trade sell \
  --group 1 --token "TOKEN_CA" --amount 50%

# Sell fixed token quantity
forgex --password "pwd" trade sell \
  --group 1 --token "TOKEN_CA" --amount 1000000

Batch (buy + sell in one bundle)

# Execute buy and sell in same Jito Bundle
forgex --password "pwd" trade batch \
  --group 1 --token "TOKEN_CA" \
  --type buyWithSell --mode 1b1s --amount 0.01

Modes: 1b1s (1 buy + 1 sell), 1b2s, 1b3s, 2b1s, 3b1s

Sniper

# Snipe with different amounts per wallet (amounts count must match wallet count)
forgex --password "pwd" trade sniper \
  --group 1 --token "TOKEN_CA" \
  --amounts "0.5,0.3,0.2" --slippage 500

tools — Market Making

All tools support --dry-run. Use --rounds to limit execution.

Turnover (wallet cycling)

Cycles tokens between two wallet groups via Jito Bundle — zero price impact.

# Simulate
forgex --password "pwd" tools turnover \
  --from-group 1 --to-group 2 --token "TOKEN_CA" --dry-run

# Run 5 turnover cycles
forgex --password "pwd" tools turnover \
  --from-group 1 --to-group 2 --token "TOKEN_CA" \
  --daemon --rounds 5 --interval 2000

# Turnover 50% of holdings
forgex --password "pwd" tools turnover \
  --from-group 1 --to-group 2 --token "TOKEN_CA" \
  --amount 50%

Volume bot

Generates on-chain trading volume with zero net loss (buy + sell in same transaction).

# Simulate
forgex --password "pwd" tools volume \
  --group 1 --token "TOKEN_CA" --dry-run

# Run 20 rounds, every 10 seconds, using 10 wallets
forgex --password "pwd" tools volume \
  --group 1 --token "TOKEN_CA" \
  --mode 1b1s --amount 0.01 --count 10 \
  --daemon --rounds 20 --interval 10000

Options: --group <id>, --token <ca>, --mode 1b1s|1b2s|1b3s|2b1s|3b1s, --amount <sol>, --count <n> (limit wallets, default: all), --interval <ms> (delay between wallets), --rounds <n>, --daemon, --dry-run

Price robot

Automatically moves price toward a target by buying (up) or selling (down).

# Simulate price push
forgex --password "pwd" tools robot-price \
  --group 1 --token "TOKEN_CA" \
  --direction up --target-price 0.001 --dry-run

# Push price up, max spend 5 SOL
forgex --password "pwd" tools robot-price \
  --group 1 --token "TOKEN_CA" \
  --direction up --target-price 0.001 \
  --amount 0.05 --max-cost 5 --interval 3000

Options: --direction up|down, --target-price <sol>, --amount <sol>, --max-cost <sol>, --interval <ms>

transfer — Fund Management

All transfer commands support --dry-run.

Collect (many → one)

# Collect all SOL from group into one wallet
forgex --password "pwd" transfer in \
  --to "MainWalletAddress" --from-group 1 --amount all

# Collect from only the first 5 wallets
forgex --password "pwd" transfer in \
  --to "MainWalletAddress" --from-group 1 --amount all --count 5

# Keep 0.01 SOL in each wallet, collect the rest
forgex --password "pwd" transfer in \
  --to "MainWalletAddress" --from-group 1 \
  --amount reserve --value 0.01

# Collect tokens instead of SOL
forgex --password "pwd" transfer in \
  --to "MainWalletAddress" --from-group 1 \
  --token "TOKEN_CA" --amount all

Distribute (one → many)

--from address must belong to a wallet group (private key required for signing).

# Send 0.1 SOL to each wallet in group
forgex --password "pwd" transfer out \
  --from "SourceAddress" --to-group 1 --value 0.1

# Distribute to only the first 10 wallets
forgex --password "pwd" transfer out \
  --from "SourceAddress" --to-group 1 --value 0.1 --count 10

# Random distribution between 0.05 and 0.15 SOL
forgex --password "pwd" transfer out \
  --from "SourceAddress" --to-group 1 \
  --amount random --value 0.05 --max 0.15

Many-to-many (wallet[i] → wallet[i])

# Transfer all from group 1 wallets to matching group 2 wallets
forgex --password "pwd" transfer many-to-many \
  --from-group 1 --to-group 2 --amount all

# Fixed amount per pair
forgex --password "pwd" transfer many-to-many \
  --from-group 1 --to-group 2 --amount fixed --value 0.1

token — Token Operations

Supports --dry-run for simulation.

Create & launch token

# Simulate token creation
forgex --password "pwd" token create \
  --dex pump \
  --name "MyToken" --symbol "MTK" \
  --image ./logo.png \
  --description "My token" \
  --dry-run

# Launch with dev buy + snipers in same block (T0 bundle)
forgex --password "pwd" token create \
  --dex pump \
  --name "MyToken" --symbol "MTK" \
  --image ./logo.png \
  --twitter "https://twitter.com/mytoken" \
  --website "https://mytoken.io" \
  --dev-wallet 1 --dev-buy 2.0 \
  --snipers 2 --sniper-amounts "0.5,0.3,0.2" \
  --bundle-time T0

Platforms: pump (Pump.fun), launchlab

Bundle time: T0 (dev buy + snipers same block), T1_T5 (snipers 1-5 blocks after dev)

Query token

# Token info (price, name, dex)
forgex token info --ca "TOKEN_CA"

# Liquidity pool info
forgex token pool --ca "TOKEN_CA"

query — Data Queries

# SOL balance
forgex query balance --address "WalletAddress"

# Token balance
forgex query balance --address "WalletAddress" --token "TOKEN_CA"

# Token price
forgex query price --token "TOKEN_CA"

# Candlestick data (intervals: 1m, 5m, 15m, 1h, 4h, 1d)
forgex query kline --token "TOKEN_CA" --interval 5m --count 50

# Transaction history for a group
forgex query transactions --group 1 --token "TOKEN_CA"

# Holdings and PnL across a group
forgex query monitor --group 1 --token "TOKEN_CA"

Slippage Reference

| BPS | Percentage | Recommended for |

|---|---|---|

| 100 | 1% | Turnover trades |

| 300 | 3% | Normal buy/sell |

| 500 | 5% | Sniping / fast entries |

| 1000 | 10% | High volatility tokens |

| 2000 | 20% | Extreme conditions |

Demo

Workflow Examples

Token Launch in 3 commands

# 1. Create wallets
forgex --password "pwd" wallet generate --group 1 --count 5

# 2. Fund them
forgex --password "pwd" transfer out --from "MainWallet" --to-group 1 --value 0.5

# 3. Launch token with dev buy + snipers
forgex --password "pwd" token create \
  --dex pump --name "MyToken" --symbol "MTK" \
  --image ./logo.png \
  --dev-wallet 1 --dev-buy 1.0 \
  --snipers 1 --sniper-amounts "0.3,0.2,0.1,0.1,0.1" \
  --bundle-time T0

Run the volume bot

forgex --password "pwd" tools volume \
  --group 1 --token "TOKEN_CA" \
  --mode 1b1s --amount 0.01 --count 10 \
  --rounds 30 --interval 10000

Collect funds back to main wallet

forgex --password "pwd" trade sell --group 1 --token "TOKEN_CA" --amount all
forgex --password "pwd" transfer in --to "MainWallet" --from-group 1 --amount all

Links

• Twitter: @SonicSVM
• npm: forgex-cli
• Sonic SVM: sonic.game