Imported from majiayu000/claude-skill-registry (skills/data/tabletest/SKILL.md). Install upstream with npx skills add majiayu000/claude-skill-registry --skill tabletest. Copyright stays with the author.

TableTest Skill

IMPORTANT: This skill should be used whenever converting multiple similar @Test methods to TableTest format, or when writing new TableTest-based tests. Always invoke this skill BEFORE attempting manual implementation.

Installation

Maven

Add this dependency to your pom.xml:

<dependency>
    <groupId>io.github.nchaugen</groupId>
    <artifactId>tabletest-junit</artifactId>
    <version>0.5.8</version>
    <scope>test</scope>
</dependency>

Check https://central.sonatype.com/artifact/io.github.nchaugen/tabletest-junit for the latest version.

### Gradle

Add this to your build.gradle:

```groovy
testImplementation 'io.github.nchaugen:tabletest-junit:0.5.8'

Or in build.gradle.kts:

testImplementation("io.github.nchaugen:tabletest-junit:0.5.8")

Import Statement

import io.github.nchaugen.tabletest.junit.TableTest;

Note: The annotation is in the .junit package, not .annotations.

When to Use TableTest

Use TableTest when:

• Testing the same logic with multiple input/output combinations
• You have 2+ similar test methods differing only in data values
• Business rules involve multiple cases/examples
• Tests would benefit from tabular documentation format
• Adding new test cases should be as simple as adding a table row

Use standard JUnit @Test when:

• Testing a single scenario
• Test logic differs significantly between cases
• Complex setup/teardown varies per test
• Mocking behaviour differs per test case

Basic Structure

A TableTest annotation contains a table with:

1. Header row defining column names
2. Data rows with test values
3. Optional but recommended scenario column (leftmost) describing each row

@TableTest("""
    Scenario          | Input | Expected
    Basic case        | 5     | 10
    Edge case at zero | 0     | 0
    Negative number   | -3    | -6
    """)
void testDoubling(int input, int expected) {
    assertEquals(expected, input * 2);
}

Key rules:

• One parameter per data column (scenario column excluded)
• Columns map to parameters by position, not name
• Each data row generates one test invocation
• Method must be non-private, non-static, return void

Value Formats

Single Values

@TableTest("""
    Value             | Description
    simple            | No quotes needed
    "contains | pipe" | Quotes required for special chars
    ''                | Empty string
                      | Blank cell = null (except primitives)
    """)

Quoting rules:

Quote values when they contain or start with special characters:

• Contains: |, ", or '
• Starts with: [ or { (prevents collection syntax interpretation)

Examples:

Unquoted OK      | Needs Quotes           | Reason
abc123           | "[1,2,3]"              | starts with [
hello world      | "{a,b,c}"              | starts with {
foo              | "a|b"                  | contains |
normal text      | "say \"hello\""        | contains "
Map.of(a, b)     | "[a:1,b:2]"            | starts with [

Note: Brackets and braces inside a string don't require quotes - only when they start the value. Escape sequence handling is a Java/Kotlin language concern, not a TableTest feature.

Collection Values

TableTest has special syntax to express collection values.

Null value (blank cell) is only supported for single values. There is no built-in way to express null values inside collection values described below.

Lists

@TableTest("""
    Numbers   | Sum
    []        | 0
    [1]       | 1
    [1, 2, 3] | 6
    """)
void testSum(List<Integer> numbers, int sum) {
    assertEquals(sum, numbers.stream().mapToInt(Integer::intValue).sum());
}

Sets

@TableTest("""
    Values       | Size
    {1, 2, 3}    | 3
    {1, 1, 2, 2} | 2
    {}           | 0
    """)
void testSetSize(Set<Integer> values, int size) {
    assertEquals(size, values.size());
}

Maps

@TableTest("""
    Scores                   | Highest
    [Alice: 95, Bob: 87]     | 95
    [Charlie: 78, David: 92] | 92
    [:]                      | 0
    """)
void testHighestScore(Map<String, Integer> scores, int highest) {
    int max = scores.values().stream().mapToInt(Integer::intValue).max().orElse(0);
    assertEquals(highest, max);
}

Nested Structures

@TableTest("""
    Student Grades                           | Highest
    [Alice: [95, 87, 92], Bob: [78, 85, 90]] | 95
    [Charlie: [98, 89], David: [45, 60, 70]] | 98
    """)
void testHighestGrade(Map<String, List<Integer>> grades, int highest) {
    // test implementation
}

Value Conversion

TableTest automatically converts table values to parameter types.

Built-in Conversion

Supports standard Java types via JUnit's implicit converters:

• Primitives and wrappers: int, Integer, boolean, etc.
• Temporal types: LocalDate, LocalDateTime, Year
• Common types: String, Class, Enum

@TableTest("""
    Number | Date       | Class
    42     | 2025-01-20 | java.lang.String
    """)
void test(int number, LocalDate date, Class<?> clazz) {
    // TableTest handles conversion automatically
}

Factory Methods for Custom Types

Create public static methods that accept one parameter and return the target type:

@TableTest("""
    Date       | Days Until
    today      | 0
    tomorrow   | 1
    """)
void testDaysUntil(LocalDate date, int expected) {
    assertEquals(expected, ChronoUnit.DAYS.between(LocalDate.now(), date));
}

public static LocalDate parseLocalDate(String input) {
    return switch (input) {
        case "today" -> LocalDate.now();
        case "tomorrow" -> LocalDate.now().plusDays(1);
        default -> LocalDate.parse(input);
    };
}

Factory method rules:

• Must be public static in test class or @FactorySources class
• Must accept exactly one parameter
• Must return target type
• Only one factory method per return type per class
• TableTest searches: test class → outer classes (for @Nested) → @FactorySources classes (first match wins)

Domain Object Conversion

Convert complex inputs to domain objects:

@TableTest("""
    Purchase Dates                                   | Discount %
    [2025-01-01, 2025-01-05, 2025-01-10]             | 0
    [2025-01-01, 2025-01-03, 2025-01-05, 2025-01-07] | 5
    """)
void testFrequentTravellerDiscount(Purchases purchases, int expectedDiscount) {
    assertEquals(expectedDiscount, purchases.discountPercentage());
}

public static Purchases parsePurchases(List<LocalDate> dates) {
    return new Purchases(dates);
}

Value Sets for Multiple Examples

Use set notation {...} to test multiple values with same expectation:

@TableTest("""
    Scenario                    | Example Years      | Is Leap Year
    Not divisible by 4          | {2001, 2002, 2003} | false
    Divisible by 4              | {2004, 2008, 2012} | true
    Divisible by 100 not by 400 | {2100, 2200, 2300} | false
    Divisible by 400            | {2000, 2400, 2800} | true
    """)
void testLeapYears(Year year, boolean isLeapYear) {
    assertEquals(isLeapYear, year.isLeap());
}

Value set behaviour:

• Creates multiple test invocations (one per value in set)
• Scenario names augmented with actual value used
• Only expands when parameter type is NOT Set<?>
• Multiple sets in same row create cartesian product:

@TableTest("""
    Scenario | a      | b      | Max sum
    Combined | {1, 2} | {3, 4} | 6
    """)
void testCartesianProduct(int a, int b, int maxSum) {
    // Creates 4 tests: (1,3), (1,4), (2,3), (2,4)
    assertTrue(a + b <= maxSum);
}

Scenario Names

Always include scenario column for better documentation and clearer test failures. Use @DisplayName and @Description to customise test names and add descriptions to reports:

@DisplayName("Transaction fee")
@Description("Transaction fee is calculated based on the amount, taking minimum threshold into account.")
@TableTest("""
    Scenario                | Amount | Fee
    Below minimum threshold | 50     | 0
    At minimum threshold    | 100    | 0
    Above minimum threshold | 150    | 5
    Large transaction       | 10000  | 50
    """)
void testTransactionFee(int amount, int expectedFee) {
    assertEquals(expectedFee, calculateFee(amount));
}

Scenario names appear in test reports, making failures immediately understandable.

Expectation Column Naming Convention

Expectation columns (columns containing expected results) should end with a question mark to make test intent immediately clear:

• Valid? - for validation tests
• Formatted? - for formatter tests
• Expected? - for general expectations
• Result? - for computation results
• Throws? - for exception tests

@TableTest("""
    Scenario          | Input      | Formatted?
    Normalize spaces  | "[1,2,3]"  | "[1, 2, 3]"
    Empty list        | "[]"       | "[]"
    """)
void testFormatter(String input, String formatted) {
    // test implementation
}

This convention is optional but recommended for clarity.

Common Patterns

Testing Business Rules

Express business logic as examples:

@TableTest("""
    Scenario              | Age | Has Licence | Can Rent Car
    Too young             | 17  | true        | false
    Adult with licence    | 25  | true        | true
    Adult without licence | 30  | false       | false
    Senior with licence   | 70  | true        | true
    """)
void testCarRentalEligibility(int age, boolean hasLicence, boolean canRent) {
    assertEquals(canRent, isEligibleToRentCar(age, hasLicence));
}

Testing Edge Cases and Boundaries

Group boundary conditions clearly:

@TableTest("""
    Scenario      | Input | Valid
    Below minimum | -1    | false
    At minimum    | 0     | true
    Normal range  | 50    | true
    At maximum    | 100   | true
    Above maximum | 101   | false
    """)
void testValidRange(int input, boolean expectedValid) {
    assertEquals(expectedValid, isInRange(input, 0, 100));
}

Testing Collections and Aggregations

@TableTest("""
    Scenario          | Numbers       | Average
    Empty list        | []            | 0.0
    Single element    | [42]          | 42.0
    Multiple elements | [10, 20, 30]  | 20.0
    With negatives    | [-10, 10, 20] | 6.67
    """)
void testAverage(List<Integer> numbers, double expected) {
    assertEquals(expected, calculateAverage(numbers), 0.01);
}

Testing Time-Based Logic

@TableTest("""
    Scenario              | Purchase Date | Today      | Expired
    Purchased today       | 2025-01-15    | 2025-01-15 | false
    Purchased 29 days ago | 2024-12-17    | 2025-01-15 | false
    Purchased 30 days ago | 2024-12-16    | 2025-01-15 | true
    Purchased 60 days ago | 2024-11-16    | 2025-01-15 | true
    """)
void testExpiry(LocalDate purchaseDate, LocalDate today, boolean expired) {
    assertEquals(expired, isExpired(purchaseDate, today));
}

Testing Exceptions

@TableTest("""
    Scenario       | Input | Expected Exception
    Negative age   | -1    | java.lang.IllegalArgumentException
    Empty name     | ''    | java.lang.IllegalArgumentException
    """)
void testExceptions(String input, Class<? extends Throwable> expectedException) {
    assertThrows(expectedException, () -> validateInput(input));
}

Testing Value Transformations

When testing formatters, converters, or transformers that operate on individual values, use a single-column table to minimize scaffolding. This approach simplifies test implementation by avoiding multi-column complexity when only testing single-value transformations:

@TableTest("""
    Scenario                 | Input                   | Formatted?
    Normalize spacing        | "[1,2,3]"               | "[1, 2, 3]"
    Remove extra spaces      | "[ [] ]"                | "[[]]"
    Nested lists             | "[[1,2],[3,4]]"         | "[[1, 2], [3, 4]]"
    Empty collection         | "[]"                    | "[]"
    Normalize map spacing    | "[a:1,b:2]"             | "[a: 1, b: 2]"
    """)
void shouldFormatCollectionInCell(String input, String formatted) {
    var tableInput = "value\n" + input;
    var result = formatter.format(tableInput);
    var lines = result.split("\n");
    assertThat(lines[1]).isEqualTo(formatted);
}

Key benefits:

• Focuses on the transformation being tested (input → output)
• Eliminates unnecessary multi-column scaffolding
• Makes test data more readable and maintainable
• Simplifies test implementation (just extract second line)

When to use:

• Testing formatters (code formatters, string formatters, etc.)
• Testing converters (type converters, value transformers)
• Testing serialization/deserialization of individual values
• Any function that transforms a single input to a single output

External Table Files

For large tables or reusable test data:

@TableTest(resource = "/test-data/user-permissions.table")
void testUserPermissions(String role, String action, boolean allowed) {
    assertEquals(allowed, hasPermission(role, action));
}

File format identical to inline tables. Stored in src/test/resources.

Comments and Blank Lines

@TableTest("""
    Scenario        | Input | Output
    
    // Basic cases
    Zero            | 0     | 0
    Positive        | 5     | 25
    
    // Edge cases
    Negative        | -3    | 9
    
    // Temporarily disabled
    // Large number | 1000  | 1000000
    """)

Lines starting with // are ignored. Blank lines improve readability.

Common Mistakes to Avoid

Don't create one-row tables:

// Wrong - use standard @Test instead
@TableTest("""
    Input | Output
    5     | 10
    """)
void test(int input, int output) { }

Don't mix different test logic:

// Wrong - different assertions per row need separate test methods
@TableTest("""
    Type   | Input | Output
    double | 5     | 10
    square | 5     | 25
    """)
void test(String type, int input, int output) {
    if (type.equals("double")) {
        assertEquals(output, input * 2);
    } else {
        assertEquals(output, input * input);
    }
}

Remember parameter order matters:

// Parameters must match column order (excluding scenario)
@TableTest("""
    Scenario | A | B | Sum
    Example  | 1 | 2 | 3
    """)
void test(int b, int a, int sum) { // Wrong - parameters swapped
    assertEquals(sum, a + b);
}

void test(int a, int b, int sum) { // Correct
    assertEquals(sum, a + b);
}

Quote special characters: Must quote strings with pipe or starting with bracket or curly bracket to avoid parse errors.

@TableTest("""
    Value             | Valid
    simple            | true
    "contains | pipe" | true
    '[1, 2, 3]'       | true
    """)

TableTest Consolidation Patterns

When multiple standard JUnit test methods follow the same structure but vary only in inputs/outputs, consolidate them into a TableTest:

Good candidates for consolidation:

• Multiple tests with identical setup and assertion logic
• Tests varying only in input data and expected outcomes
• Validation tests checking different scenarios

Keep as separate @Test methods:

• Edge cases with null/empty inputs
• Tests requiring complex setup (e.g., creating subdirectories)
• Tests with fundamentally different assertion logic

TableTest best practices:

• Use List<String> for file lists: [file1.txt, file2.txt]
• Use path notation for subdirectories: [subdir/file.txt]
• Include @Scenario String _scenario when using @TempDir (parameter shift issue)
• Create parent directories: Files.createDirectories(filePath.getParent())

Example:

@TableTest("""
    Scenario          | Files                    | Expected
    Single file       | [file.txt]               | [file]
    Multiple files    | [a.txt, b.txt]           | [a, b]
    Subdirectory      | [dir/file.txt]           | []
    """)
void discovers_files(@Scenario String _scenario, List<String> files, List<String> expected,
                    @TempDir Path tempDir) throws IOException {
    for (String file : files) {
        Path path = tempDir.resolve(file);
        Files.createDirectories(path.getParent());
        Files.writeString(path, "content");
    }
    // assertions...
}