Imported from davidpiontransactions-eng/pariscore (.agents/tools-active/praxist/praxist-interactive-task-init/SKILL.md). Install upstream with npx skills add davidpiontransactions-eng/pariscore --skill praxist-interactive-task-init. Copyright stays with the author.

Praxist Interactive Task Init

Use this skill when task initialization needs explicit user confirmation. It is a thin interactive layer over praxist-task-initialization, not a separate task format.

This layer inherits the complete current runtime contract from praxist-task-initialization. Keep agent_runtime:claude_sdk as the default unless the user approves another runtime. If the user selects agent_runtime:codex_sdk, apply the SDK/MCP/relay readiness and task-boundary rules from that skill; do not treat the interactive agent CLI hosting this conversation as the peer runtime. Its saved ChatGPT authentication may be approved for native OpenAI, but must remain operator-owned and outside the generated task. Preserve the tested runtime pins inherited from task initialization: claude-agent-sdk==0.2.136, openai-codex==0.147.0, and codex-relay==0.5.5.

Provider-specific context efficiency is runtime-owned. When the user selects Codex-native mode or OpenRouter, explain that Praxist automatically coalesces finding-only continuation wakeups without deleting or compressing canonical evidence. Do not offer task-local cache, memory-store, or session-batching fields. Direct DeepSeek runs preserve their existing behavior.

Reasoning effort is inherited from the complete task-init contract. Propose agent.reasoning_effort: max; ask for confirmation only when the user raised reasoning depth, latency, or cost as a constraint, and preserve any explicit off, low, high, or max answer.

Interaction Principle

Use confirmation first, not input first:

1. Inspect the project and propose a concrete harness decision.
2. Ask the user whether to accept or correct it.
3. Apply accepted decisions to the normal task-initialization workflow.

Keep interaction short. Use at most 5 confirmation rounds by default. This limit follows working-memory and UX evidence: practical working memory is often closer to 3-4 chunks, choice overload hurts decisions, and progressive disclosure keeps advanced questions deferred until needed. Group related decisions into one round and use progressive disclosure for rare edge cases.

Opening Banner

**IMPORTANT PRECONDITION**
Praxist task initialization assumes the research project already runs on
this machine with all required code, data/simulator assets, runtime/container,
and credentials available. If the project cannot run locally, this skill must
stop and ask for the missing path or environment.

Five-Round Confirmation Flow

Round 1: Project scope and local assets

• Propose the research project root and output task path.
• Summarize available code, data, simulator, runtime, and prior results.
• Ask the user to confirm or correct missing/ambiguous assets.

Round 2: Research goal, constraints, and allowed interventions

• Propose the task objective, hard constraints, allowed code surfaces, and invalid-result conditions.
• Confirm what Praxist peers may change and what must remain fixed.
• Propose which evaluator modes may launch and which may rank, count as mature, become durable parents, or satisfy close. The user's answer is authoritative; do not assume every task must use a full-only protocol.

Round 3: Metrics, ranking, and robustness

• Propose primary metric, direction, auxiliary metrics, baseline definition, and the minimum frontier-lane structure justified by the task. For staged, diagnostic, or multi-axis evaluation, propose strict confirmed, lower-admission durable incubator, lower-confidence task-candidate, and diagnostic/control lanes. For a cheap single-protocol task, do not invent unsupported lanes or maturity stages.
• Use project evidence first; when ambiguous, run bounded no-key web/literature lookup to identify domain ranking conventions.
• Explicitly ask whether variance, seed sensitivity, confidence intervals, lower confidence bounds, safety/regret constraints, or Pareto fronts should affect ranking. If yes, encode robust metrics or Pareto axes in the task.
• Confirm the incubator policy when the task needs a separate durable promising-candidate lane. It should be a low-admission long-term variant library, not a high-standard confirmed frontier. Under the recommended default it retains parent-authorized, protocol-passed, non-suspect Pareto/new-high candidates for later repair, validation, escalation, ablation, or falsification. If the user authorizes a reduced parent protocol, use that protocol consistently instead. Confirm the incubator lane sets admit_new_high: true.
• Confirm how canonical evaluator source labels reach those target lanes. When confirmed and incubator both need ordinary clean parent-authorized evidence, propose one shared task-owned source label (normally performance) accepted by both instead of forcing the user to classify every parent-authorized result as a final target lane. The full task-init workflow must generate and pass a lane-routing regression before launch.

Round 4: Evaluation protocol and compute budget

• First restate the confirmed protocol-intent table. If the user intentionally selected partial, scout, reduced-coverage, or other incomplete evidence for ranking or mature use, preserve it and require transparent stage and effort/coverage metadata. Only undeclared drift is invalid.
• Then decide whether staged evaluation is justified only for details the user has not already decided. If the target protocol is expensive, normally propose task-owned preliminary, aligned, and complete mature modes. If it is cheap, normally propose one complete mode. Do not add or re-propose a full mode when the user has explicitly selected an intentionally reduced protocol for the run. Literal labels carry no global semantics.
• When aligned evaluation exists, preserve near-complete data/evaluation coverage and save compute primarily through fewer training/optimization steps.
• If the confirmed maturity definition uses effort/coverage ratios, confirm canonical evaluator summaries emit exact effort_ratio and coverage_ratio fields and confirm the evaluation.maturity_policy thresholds that use them. Use require_ratio_gate: true only for that choice; otherwise preserve the user's explicit label/flag or information-density semantics. List task-owned labels only when staged protocols exist, for audit and explicit fallback. Praxist projects these facts into auto-materialized findings; require them directly only for standalone findings without a canonical summary reference.
• Before launch, run the shortest valid scored path through the real summary writer and validate its output with praxist resolve <task_path> --result-summary <summary_path>. Missing required ratios must lead to evaluator repair or an explicit user-approved gate disable, not invented stage labels.
• For every configured lane, confirm mature parent lanes have parent_eligible: true, while lower-stage/diagnostic lanes use parent_eligible: false. A lane with allow_lower_tier: true must not become a durable implementation-parent lane.
• If the task enables Gems, confirm its configuration uses selection_policy: mature_evidence_top_k and derives min_mature_eval_units from the protocol authorized for Gems and parent use, normally the complete protocol. If stages have cumulative requirements, define them with evidence_stage_min_units using task-owned labels and evaluation-unit counts. Do not generate a compatibility-only historical maturity field.
• Confirm compact summaries are written recursively under results/**/ using summary.json, evaluation_summary.json, eval_summary.json, tiered_eval_summary.json, or custom_*_tiered_eval_summary.json (result_summary.json is a compatibility name), reuse a stable top-level candidate identity across stages (or an explicit child-result ID), and carry structured lane, maturity, protocol, and diagnostic metadata for materialization.
• Confirm evaluator execution prefers the synchronous public entrypoint. If a background evaluation is explicitly supported, use the Praxist submission facade and a documented task-owned progress/result contract. Never use the byte size of a runtime-private tasks/<task-id>.output transcript as completion; successful commands may emit no text, and the runtime notification/exit status owns completion.
• Confirm evaluation.constructive_peer_mix_enabled and evaluation.constructive_target_ratio, evaluation.launch_guard.estimated_heavy_eval_minutes, the separate estimated_close_grade_eval_minutes, and whether optional synthesis_trigger.mature_quorum_fraction is positive when the task distinguishes mature/complete evidence from preliminary, partial, diagnostic, or progress findings. Explain that 0.0 allows raw information density to become the normal close condition; propose it only when the user explicitly confirms that the task has no separate close-grade evidence contract.
• When close requires mature/complete evidence, show the measured complete evaluator p90, safety factor, earliest effective close horizon, and drain margin. Require estimated_close_grade_eval_minutes * safety_factor < effective close horizon - drain margin before approval. Keep the heavier ordinary estimate separate when a user-authorized reduced protocol owns close. If the inequality fails, propose longer bounds or a user-authorized protocol change rather than silently weakening evidence.
• Confirm internal evaluator/trainer/config paths are task-root relative, intentional external absolute paths exist, and the public evaluator resolves identically from the task root and a run-like subdirectory using the declared task interpreter without runner-owned Python import paths.
• Confirm absolute-gen0-only DIG, the independent initial/later quality_diversity switches, and the separate dig_lite.innovation.enforce_forward_slots choice. Explain that later QD is soft guidance inside the existing single-PI or Multi-PI synthesis path and does not run DIG again. If the user changes cohort size, re-check these soft mix choices and ask for confirmation only when they materially conflict.
• Confirm task prompts state the close boundary explicitly: after CLOSING_SIGNAL, existing training/evaluation work drains naturally, but a peer may only inspect results, publish findings, and update notebook/memory; it must not launch another evaluator, script, shell launcher, or background process.
• If a proposed complete protocol is materially below the project's established reference effort or measured convergence evidence and the user has not already decided, pause and ask whether to keep it, increase it, or downgrade it to aligned evidence. Do not impose universal epoch, step, rollout, or wall-clock threshold, and do not re-litigate an explicit user choice.
• Estimate hardware bottleneck and propose peers, generation count, generation duration, evaluator concurrency, and baseline-measurement handling.
• Show the unchanged baseline command used for resource observation. When Praxist can own and observe local process launch, propose central scheduler named profiles, initial/max host-wide concurrency, and measured pressure for the backend actually used by the unchanged baseline. CUDA/NVIDIA/UUID checks are applicable only when that compatible managed backend was detected and selected. CPU-only, unified-memory, task-managed, and other accelerator backends are normal paths. Otherwise propose a bounded documented external/legacy owner rather than forcing central mode. Never propose synthetic CPU-vs-accelerator rewrites or per-experiment CPU-core reservations.
• Confirm the public evaluator's normal default profile, naturally independent seeds/folds/scenarios or other task-owned evaluation units, which layer owns their concurrency, and whether a declared multi-device profile really uses every assigned device. Confirm directed idle resource-supply feedback; it may wake only productive idle peers for one already planned experiment and must not weaken protocol maturity. Use a 600-second bounded response window by default; it limits submission timing, not the runtime of work admitted before expiry. Propose the default mature supply target Q=ceil(peers*0.25) with bounded 3D in-flight redundancy, while preserving an exploration first wave. Keep the hard close quorum independently positive for tasks with maturity distinctions. If measured generation feasibility is insufficient, propose a longer generation, different concurrency, or a user-approved evidence protocol; do not turn raw findings into normal-success close merely to avoid a deadlock.

Round 5: Final harness and launch readiness

• Show the final task path, baseline status, evaluator command, provider/runtime recommendation, absolute-gen0 DIG status, initial/later QD status, continuous-evolution/Gems policy, and report generation settings.
• Ask for approval to write/update the task directory. Do not start a run unless the user separately asks or this skill is being used inside praxist-takeover.

Execution Rules

• Use praxist-task-initialization for the actual task-project creation steps after decisions are confirmed.
• Abort on missing required code, data/simulator, runtime dependencies, or executable baseline/evaluation path.
• Do not store raw API keys in the task directory.
• Do not edit Praxist core or guard code.
• Do not create task-specific hacks in Praxist plugins.
• Do not launch long baseline measurements without user approval.

Final Output

Report:

• confirmed decisions and any user corrections;
• task directory path;
• baseline status: existing, measured, zero placeholder, or blocked;
• metric/ranking rule including robustness treatment;
• incubator policy and distinct metric families used for Pareto/new-high retention;
• evaluator source-lane contract and lane-routing regression result;
• task-owned evaluation stages, maturity ratio fields, and expected budget/integrity fields;
• user-approved protocol intent for launch, ranking, maturity, parent use, and close;
• selected maturity policy, constructive target, launch guard, and mature quorum settings;
• selected Praxist run parameters and launch recommendation;
• selected provider/runtime and whether runtime-owned lossless context efficiency is expected (Codex-native mode/OpenRouter), unchanged (direct DeepSeek), or explicitly disabled by the operator;
• validation commands run and results;
• remaining questions, if any.