gumroad-prod-console

Imported from antiwork/gumroad (.agents/skills/gumroad-prod-console/SKILL.md). Install upstream with npx skills add antiwork/gumroad --skill gumroad-prod-console. Copyright stays with the author.

Gumroad production console

Read-only Rails runner against the production read replica via bastion SSH.

Execution

.claude/skills/gumroad-prod-console/scripts/prod_query.sh 'puts User.count'
.claude/skills/gumroad-prod-console/scripts/prod_query.sh /tmp/query.rb
echo 'puts User.count' | .claude/skills/gumroad-prod-console/scripts/prod_query.sh

Multi-line queries: write a temp .rb file, pass its path. Bash tool timeout is ~120s — wrap slow queries in WithMaxExecutionTime.timeout_queries(seconds: 30) { ... }. Queries run against the read replica (DATABASE_WORKER_REPLICA1_HOST by default).

Follow-up queries are cheap — start scoped (one record, one field), then drill in as the investigation clarifies. Avoid the urge to return everything in a single large query.

Warm hops: prod_query.sh multiplexes SSH to the bastion (ControlPersist) and reuses the last-good instance IP for 10 minutes (PROD_IP_CACHE_TTL). A second query should skip EC2 discovery. Pin with PROD_INSTANCE_IP to skip it entirely. Tracked in gumroad-private#2197.

Persistent runner: the first replica-default query on a host boots a long-lived rails runner loop (scripts/prod_runner_loop.rb) inside the puma container; later queries are spooled to it and skip Rails boot entirely (~1s warm vs ~14s one-shot). The loop forks per query, keeps stdout/stderr separate, idles out after 30 minutes without work, and is replaced automatically when the local prod_runner_loop.rb changes. Non-default PROD_DB_HOST_VAR sessions (primary writes) always take the one-shot path; PROD_NO_RUNNER_LOOP=1 opts out.

Safety

• Read-only. Never write, update, or delete.
• No Redis KEYS or FLUSH*. prod_query.sh prepends scripts/redis_command_guard.rb, which refuses them: one KEYS over the ~4.6M-key primary blocks it for seconds and 500s the site. Use $redis.scan_each(match:, count: 1000).first(n).
• Always .limit() / .first() / .take() — never unbounded result sets.
• Prefer .pluck(:col, :col) over loading full AR objects.
• Mask PII in output (truncate emails, addresses, payment details).
• .explain before querying large tables without indexed conditions.
• Emit structured output (JSON for complex, .inspect for simple) so results are parseable.

Gumroad-specific gotchas

External IDs, not primary keys

Admin URLs and public IDs use external IDs (ExternalId module — Base64 strings like aBcDeFgHiJkLmNoPqRsTuQ==), not integer PKs.

Purchase.find_by_external_id("aBcDeFgHiJkLmNoPqRsTuQ==")  # correct
Purchase.find("aBcDeFgHiJkLmNoPqRsTuQ==")                  # WRONG — treats it as a PK, silently returns the wrong record

Model naming

User, Balance, Dispute, Follower, CustomDomain behave as names suggest.

Sidekiq queues

critical (12k limit — payouts, webhooks, receipts) → default (300k — general) → long (PDF stamping etc.) → low (expiry). Queue limits at app/controllers/healthcheck_controller.rb:28; worker ordering at docker/web/sidekiq_worker.sh.

DevTools (Gumroad-specific helpers)

See lib/utilities/dev_tools.rb:

• DevTools.reindex_all_for_user(user_id) — reindex ES data
• DevTools.reimport_follower_events_for_user!(user) — reimport follower analytics

For Gumroad-specific scopes and associations (alive, successful, unpaid_balance_cents, payments, products, Flipper checks, Sidekiq introspection), see references/common-queries.md.

Stale bastion host keys look like unhealthy instances

EC2 recycles private IPs, so the bastion's known_hosts accumulates stale keys and refuses the onward hop with REMOTE HOST IDENTIFICATION HAS CHANGED / Offending ECDSA key. From outside this is easy to mistake for a hung instance, and it silently shrinks the usable pool each time instances are replaced.

prod_query.sh catches them without touching the pin: a candidate is recorded as stale-keyed when a changed-key complaint names its address — including on a probe that looked healthy, since the forced command exits 0 after its own hop refused — and the run reports those addresses with the one-hop ssh-keygen -R command to run by hand.

• The pin is never removed automatically. Every textbook trigger for a removal is something a pin exists to defend against: EC2 membership says the address is a pool member, not that the key it serves is the instance's, and a changed-key complaint is an alarm rather than proof of a recycle — deleting the entry and reconnecting pins whatever answered. Clearing is an explicit operator action, printed as a one-hop command.

• Only genuinely outdated keys are reported. A plain timeout, a container that is still starting, or a network blip leaves the recorded key alone — only SSH naming that address counts. The onward hop usually just warns about a changed key and connects anyway (recycled IPs make that the steady state), so a warn-and-proceed failure stays on the patient-retry list too. Only an outright Host key verification failed refusal drops a candidate from the retry.

• A pool rejected entirely for stale keys says so, with that same command, instead of the generic health-probe error.

• LC_PAPER=127.0.0.1 means the bastion itself. The forced command jumps to whatever LC_PAPER names, and omitting the variable — or the -o SendEnv=LC_PAPER that ships it — fails with ssh: Could not resolve hostname; instance IPs run the command on that instance. Anything aimed at the bastion's own files goes through 127.0.0.1.

• The warning text is often noise. A run can print the whole man-in-the-middle banner for a previous hop and still succeed. Judge by exit code and MARK output, not the banner. rc 255 is the transport dropping mid-flight, so the outcome is unknown — do not read it as a failed query. Any other nonzero rc whose only output is the banner means the query failed: look for Query process killed by SIGKILL or the query's own output.

"No instance passed the health probe" usually means slow, not down

The candidate probe is deliberately impatient (20s) so one hung host cannot eat the caller's budget, but that also rejects hosts which are merely slow under load. When every candidate fails, a fleet-wide outage is the less likely reading.

prod_query.sh now retries the non-stale-key rejections with a patient probe before giving up, and says so (answered on the patient retry (slow, not unhealthy)). Only the all-rejected path pays for this.

Both passes draw down one shared 90s selection budget (PROD_SELECT_BUDGET), so picking a host can never consume the caller's whole ~120s Bash-tool window before the query starts — a large pool shortens each probe rather than adding to the total. A third of the budget is held back for the patient pass, so a pool of slow hosts cannot drain everything in the fast pass and starve the retry. Running out gives a distinct message that says the pool may just be slow, instead of the misleading "no instance passed the health probe". Raise the budget when you have more wall clock than the Bash tool allows:

PROD_SELECT_BUDGET=240 timeout 560 bash .agents/skills/gumroad-prod-console/scripts/prod_query.sh q.rb

If you still get the hard error, force a host rather than assuming production is down:

PROD_INSTANCE_IP=10.1.34.180 bash .agents/skills/gumroad-prod-console/scripts/prod_query.sh q.rb

This matters for watchers, not just interactive use: a cron that treats an unreadable console as "nothing to report" goes silent indefinitely and looks healthy. On 2026-07-29 all 8 candidates were rejected while a forced host answered the same query in 13s.

Grepping only for ^MARK can hide a total failure

... | grep "^MARK" on a run that never reached Rails returns empty with exit 0, which reads as "query worked, no rows". Capture to files and echo the exit code:

timeout 560 prod_query.sh /tmp/q.rb > /tmp/q.out 2>/tmp/q.err; echo "exit=$?"
grep -a "^MARK" /tmp/q.out

Exit 124 = outer timeout (query too heavy). 255 = SSH itself failed: either the hop dropped before Rails started, or the transport dropped mid-flight with the spool state unknown — treat the query's outcome as unknown rather than failed.

association.unscoped reads the whole table

Link has no default_scope, so user.links already includes deleted rows — there is nothing to reach for .unscoped for. On an association it drops the user_id condition instead, leaving SELECT * FROM links (millions of rows). Iterating that gets the query process OOM-killed: the run exits nonzero, prints Query process killed by SIGKILL, and the stale host-key banner above it is not the cause. Use user.links (or Link.where(user_id: user.id)).

Keep Stripe API calls out of loops

The DB is fast; Stripe::Transfer.list / Charge.retrieve per record is what blows the timeout — even ~5 accounts with one Stripe call each can hit exit 124. Use raw SQL via ActiveRecord::Base.connection.select_all for population questions, and fetch at most 1–2 Stripe objects per run when you need live processor state.

Requirements

• An AWS profile with ec2:DescribeInstances on the prod account. The script defaults to the profile gumroad-prod (created by scripts/setup.sh). Override by exporting AWS_PROFILE or setting PROD_AWS_PROFILE in your config file.
• SSH access to your production bastion (defaults to bastion-production.gumroad.net)

Gumroad team one-time setup

If you previously ran this script via GUMROAD_DEPLOYMENT_DIR and .env.aws, run the helper from the repo root to migrate those creds into an AWS CLI profile:

.claude/skills/gumroad-prod-console/scripts/setup.sh
# or pass an explicit path:
.claude/skills/gumroad-prod-console/scripts/setup.sh ~/path/to/.env.aws

The helper will also offer to append export AWS_PROFILE=gumroad-prod to your shell profile — say yes and reload the shell. After this, gumroad-private is no longer required to run the skill.

Configuration (self-hosters)

Defaults target Gumroad's prod infra. If you're running your own Gumroad fork, override by creating ~/.config/gumroad-prod-console.env:

PROD_BASTION=bastion.mycompany.com
PROD_SECURITY_GROUP=my-web-sg
PROD_CONTAINER_FILTER=app-*
PROD_DB_HOST_VAR=MY_READ_REPLICA_HOST
PROD_AWS_PROFILE=my-aws-profile

Or export the same variables before invoking the script.