Imported from adityakamath/ros2-skill (SKILL.md). Install upstream with npx skills add adityakamath/ros2-skill. Copyright stays with the author (Apache-2.0).

ROS 2 Skill

⚠️ ATTENTION — READ FIRST. This block overrides any conflicting instinct or rationalisation below.

If profile show returns a non-empty summary, the session is Path A. In Path A:

• Do not run topics find, topics type, tf list (for frame names), services find, or a params list velocity-limit sweep for any data the profile already holds. This is a Rule 14 violation, not "extra safety".
• The profile fields are the source of truth for: cmd_vel_topic, velocity message type, odometry topic, velocity safety limits, TF frame names, controller names, e-stop service, joint names.
• The only live calls allowed before motion in Path A: (1) preflight motion --controller <NAME> --odom-topic <ODOM_TOPIC> for combined runtime active/inactive + stationary check (or the slower separate control list-controllers + odom subscribe pair), (2) interface proto <VEL_TYPE> once per session for the payload template, (3) optional topics hz if you have not yet seen the odom rate.
• Forbidden rationalisations (if you find yourself thinking any of these, you are violating Rule 13 — stop and use the profile):
  • "Maximum safety requires live introspection."
  • "This catches runtime changes the profile might miss."
  • "The profile is just a reference for static info; control and safety checks must be done live."
  • "Profile data alone is never enough for actuation."
  • "Using the profile is justified because it was just rescanned / because it is fresh." — The profile is the source of truth for static data always in Path A, not just when fresh. If you think the profile might be stale, run Rule 0.0b escalation (compare to live graph and stop on disagreement); do not bypass with live discovery.
• The single test before any introspection: "Is this field present in the profile?" — yes → use it; no → fall back to live for that one field only (Rule 0.0a); disagrees with live graph → stop and escalate (Rule 0.0b). The path does not flip.

Detailed Path A operational rules: see "Path A operational summary" section below. Authoritative rules: references/RULES-CORE.md Rule 13 + Rule 14, references/RULES-MOTION.md Rule 3 Step 1.

Structural enforcement (since v1.0.8): the CLI itself refuses topics find / services find calls that violate Path A. The refusal JSON names the matching profile field. profile show always includes a path_a_reminder block listing forbidden commands and the profile fields that replace them. Read that block at session start — it is the contract. If the guard refuses a call you genuinely need (Path B / debug), pass --ignore-profile; that override is logged.

Provides a structured JSON interface to a live ROS 2 robot. All commands output JSON. Every skill invocation follows three mandatory phases: resolve → act → verify. Resolve means: read every static field (topic names, message types, limits, frame names, controller names) from the profile first (Path A) and run a live call only when (a) the profile is absent / does not have that field (Path B / Rule 0.0a), or (b) the value is dynamic runtime state — controller active/inactive, robot stationary, payload template, odom rate. "Resolve" is not a synonym for "introspect everything live" — in Path A it collapses to zero live calls for profile-covered fields. Act issues the command. Verify reads post-action state. Never skip any phase, and never expand "resolve" into full live discovery when Path A is active.

Entry Point

Always use ros2_cli.py. Never call ros2 directly or run submodules directly.

python3 {baseDir}/scripts/ros2_cli.py <command> [subcommand] [args]
python3 {baseDir}/scripts/ros2_cli.py --help           # list all commands
python3 {baseDir}/scripts/ros2_cli.py <command> --help # list subcommands

{baseDir} is the path to the skill root directory. Resolve it from the skill metadata before running any command.

Session Start Checklist

Run once per session before the first task. Takes seconds. Catches the most common silent failures.

# Step 1 — health check (--exclude-packages skips BOTH network-bound
# checks — PackageCheck's version lookup and PlatformCheck's distro-support
# lookup, the latter easy to miss since its name doesn't contain "package" —
# ~49% faster and no less useful for a routine check)
python3 {baseDir}/scripts/ros2_cli.py doctor --exclude-packages

# Step 2 — daemon
python3 {baseDir}/scripts/ros2_cli.py daemon status
python3 {baseDir}/scripts/ros2_cli.py daemon start      # if not running

# Step 2b — fast daemon (optional, recommended). A persistent rclpy node
# that hot-path commands (control list-controllers, topics subscribe,
# preflight motion/joint-command, services call, params get, tf lookup) use
# automatically instead of paying rclpy.init()/shutdown() per call — cuts
# those calls from ~3-4s to ~1.0-1.4s. tf lookup in particular benefits from
# a persistent tf2 buffer that's been listening since the daemon started,
# so it needs no per-call spin-and-wait at all.
# Purely a speedup: if it's not running, or you skip this step, every command
# falls back to its normal per-process path unchanged. Safe to start once and
# leave running for the whole session.
python3 {baseDir}/scripts/ros2_cli.py daemon-fast status
python3 {baseDir}/scripts/ros2_cli.py daemon-fast start  # if not running

# Step 3 — simulated time (if applicable)
python3 {baseDir}/scripts/ros2_cli.py topics find rosgraph_msgs/msg/Clock

# Step 4 — lifecycle nodes (if present)
python3 {baseDir}/scripts/ros2_cli.py lifecycle nodes

# Step 5 — log directory (no command — note for diagnostics)
# Resolve: $ROS_LOG_DIR → $ROS_HOME/log/ → ~/.ros/log/

# Step 6 — graph snapshot
python3 {baseDir}/scripts/ros2_cli.py context          # topics (cap 50), services, actions, nodes

# Step 7 — robot profile (load if available; skip if absent)
python3 {baseDir}/scripts/ros2_cli.py profile show
# → robot_type, packages, launch_files, velocity_topics, safety_limits, sensor_flags
#
# Path classification (decided once, here):
#   profile show succeeded AND summary is non-empty  → Path A (profile-first)
#   profile show failed OR summary is empty          → Path B (live introspection for everything)
# Do NOT re-classify per task. Auto-rescan, freshness gating, and `profile scan` triggers:
# see RULES-PREFLIGHT.md Rules 0.0, 0.6, 0.7 (loaded at session start).
#
# If absent: build once, using these rules derived from the user's request:
#
#   ONE robot named  → pass --name <robot_name>  (pkg filter is auto-derived from the name)
#     python3 {baseDir}/scripts/ros2_cli.py profile scan --name lekiwi
#     python3 {baseDir}/scripts/ros2_cli.py profile scan --name depthai
#
#   MULTIPLE robots named  → pass --packages <r1>,<r2> plus --name <combined_label>
#     python3 {baseDir}/scripts/ros2_cli.py profile scan --packages lekiwi,quest_teleop --name lekiwi_quest
#
#   NO robot name given (bare "create a profile" / "scan workspace")  → omit both flags
#     python3 {baseDir}/scripts/ros2_cli.py profile scan
#
# Use summary.safety_limits as the --max-vel / --max-ang ceiling (Rule 28).

Stop and tell the user if Step 1 reports critical failures. Re-run Step 3 before every timed command in simulation.

Path A operational summary (READ BEFORE EVERY ACTION when profile is loaded)

When profile show returned a non-empty summary at Step 7, the session is Path A. In Path A, the profile is the source of truth for static data — running live discovery for data the profile already holds is a rule violation (Rule 14), not extra safety.

Use directly from the profile — zero live calls:

The only live calls still mandatory before motion in Path A (these read runtime state, which the profile cannot know):

1. preflight motion --controller <NAME> --odom-topic <ODOM_TOPIC> — confirms the controller named in summary.active_controllers is active and that the robot is stationary, in a single rclpy node spin. Prefer this over the two separate calls below — it pays one rclpy.init()/shutdown() cycle (one middleware discovery round-trip) instead of two, roughly halving pre-motion latency. Check ready_for_motion in the response; if false, inspect controller_active and stationary to see which one failed.
   • Equivalent but slower two-call form (still correct, use only if you need the full controller list or a --duration/streaming subscribe): control list-controllers + topics subscribe <ODOM_TOPIC> --max-messages 1 --timeout 2.
2. interface proto <VEL_TYPE> — once per session, get the payload template (the type came from the profile, but the field layout did not).
3. Optional: topics hz <ODOM_TOPIC> --duration 2 if publish-until is being used and you have not confirmed odom rate this session.

Before a joint/pan-tilt/arm position command (same principle, different profile field — summary.joint_command_topics[] instead of cmd_vel_topic):

1. preflight joint-command --controller <NAME> --joint-state-topic /joint_states --joints <j1,j2,...> — confirms the controller is active and reads current joint positions, in a single rclpy node spin. Check ready_for_command; if false, inspect controller_active and missing_joints.
   • Equivalent but slower two-call form: control list-controllers + topics subscribe /joint_states --max-messages 1 --timeout 2.
2. No interface proto needed — msg_type is always std_msgs/msg/Float64MultiArray and its shape ({"data": [...]}, ordered per summary.joint_command_topics[].joints) never varies, unlike Twist/TwistStamped.
3. Publish once via topics publish <topic> '{"data": [v1, v2, ...]}' (a single position command holds as the setpoint — no publish-until/streaming needed), then verify with one topics subscribe /joint_states --max-messages 1 --timeout 2 after a short settle — no fixed/blind sleep.

Path A violation — worked counterexample (what NOT to do):

User request: "drive forward 1 m". Profile is loaded.

❌ topics find geometry_msgs/msg/Twist             # Rule 14: profile has cmd_vel_topic
❌ topics find geometry_msgs/msg/TwistStamped      # Rule 14: profile has velocity_topics[].type
❌ topics find nav_msgs/msg/Odometry               # Rule 14: profile has fused_sources
❌ topics type <discovered_topic>                  # Rule 14: profile has the type
❌ nodes list && params list <each-node>           # Rule 14: profile has safety_limits.binding

Cost of the violation: 5–30 seconds wasted, and if any topics find returns a topic that disagrees with the profile, the agent will silently use the live answer — masking the disagreement that Rule 0.0b is specifically designed to surface. Live discovery in Path A is not "extra safety"; it actively hides safety-relevant mismatches and delays the command.

Correct Path A motion sequence:

✅ Read VEL_TOPIC, VEL_TYPE, ODOM_TOPIC, MAX_VEL, MAX_ANG from profile              (0 live calls)
✅ interface proto <VEL_TYPE>                                                       (1 live call, once/session)
✅ preflight motion --controller <NAME> --odom-topic <ODOM_TOPIC>                   (1 live call — controller + stationary, combined)
✅ topics publish-until <VEL_TOPIC> '<payload>' --monitor <ODOM_TOPIC>               (the actual command)
✅ topics subscribe <ODOM_TOPIC> --max-messages 1 --timeout 2                       (post-motion verify, Rule 8)

2 live calls before the command + 1 after. Not the 6–9 live discovery calls of Path B, and one fewer rclpy session than the separate control list-controllers + topics subscribe pair.

If a profile field is missing (Rule 0.0a): fall back to live discovery for that one field only — the path does not flip. Other fields stay on the profile.

If a profile field's value disagrees with the live graph (e.g., summary.cmd_vel_topic is not in topics list): stop and escalate per Rule 0.0b. Do not silently retry with live discovery.

Critical Rules

Read the domain-specific rule files from references/ before the first action. These are hard constraints — not guidelines. Use references/RULES.md as the index to find the right file. Always load at session start: RULES-CORE.md, RULES-PREFLIGHT.md, and RULES-MOTION.md. Add RULES-DIAGNOSTICS.md when something fails. Key principles:

1. Two-Path Model — profile first, live fallback. Path A (profile loaded) uses profile fields for static data and live calls only for runtime state; Path B (no profile) does full live introspection. Path is fixed for the session, decided once at Step 7. Never hardcode names, types, or limits. Full guardrails (field-presence rules, exact field names, escalation on runtime mismatch, auto-rescan gating, scan triggers) live in RULES-PREFLIGHT.md Rules 0.0, 0.0a, 0.0b, 0.6, 0.7 and RULES-CORE.md Rules 13, 14.

2. Get the payload template. Before publishing or calling: interface proto <msg_type>. Copy the output. Modify only the fields the task requires. For non-primitive nested fields, run interface show <nested_type> recursively until all leaf fields are primitives.

3. Verify every effect. A zero-error CLI response means the request was delivered — not that the effect occurred. Always follow up: params get, control list-controllers, subscribe to confirm, etc.

4. Diagnose before reporting. On any error: introspect → self-correct → retry → report. Never ask the user to interpret an error you can check with the CLI.

5. Safety is non-negotiable. Velocity limits, pre-motion odom checks, and post-motion verify are mandatory. Never bypass them.

6. Context discovery is parallel. When discovering multiple independent facts (velocity topic, odom topic, limits, controller state), issue all commands simultaneously — never sequentially.

Common Operations

Introspection

python3 {baseDir}/scripts/ros2_cli.py context                             # session-start graph snapshot
python3 {baseDir}/scripts/ros2_cli.py context --include-schemas           # + schemas for all discovered topic types (opt-in; adds token cost)
python3 {baseDir}/scripts/ros2_cli.py topics list [--limit N]             # list topics (cap at N)
# Velocity topic — profile fast-path: use summary.cmd_vel_topic + summary.velocity_topics[].type
# Odom topic — profile fast-path: use summary.localization_config.fused_sources values
# Fallback (profile absent or field missing):
python3 {baseDir}/scripts/ros2_cli.py topics find geometry_msgs/msg/Twist # find velocity topic
python3 {baseDir}/scripts/ros2_cli.py topics find nav_msgs/msg/Odometry   # find odom topic
python3 {baseDir}/scripts/ros2_cli.py topics type <topic>                 # confirm exact type
python3 {baseDir}/scripts/ros2_cli.py topics details <topic>              # publisher count + QoS
python3 {baseDir}/scripts/ros2_cli.py topics hz <topic>                   # confirm topic is live
python3 {baseDir}/scripts/ros2_cli.py nodes list
python3 {baseDir}/scripts/ros2_cli.py services list
python3 {baseDir}/scripts/ros2_cli.py actions list
python3 {baseDir}/scripts/ros2_cli.py tf list                             # discover TF frames

Publishing

Path A (profile loaded): resolve <VEL_TOPIC> and <VEL_TYPE> from the profile — do NOT run topics find / topics type. See "Path A operational summary" above.

# Path A field resolution (no live calls):
#   VEL_TOPIC     = summary.cmd_vel_topic                          (e.g. /base_controller/cmd_vel)
#   VEL_TYPE      = summary.velocity_topics[].type                 (e.g. geometry_msgs/msg/TwistStamped)
#   ODOM_TOPIC    = first value of summary.localization_config.fused_sources   (e.g. /base_controller/odom)
#   MAX_VEL       = summary.safety_limits.binding.linear_x
#   MAX_ANG       = summary.safety_limits.binding.angular_z
# Path B (no profile): discover via `topics find geometry_msgs/msg/Twist` and
# `topics find geometry_msgs/msg/TwistStamped`, then `topics type` to confirm.

# Get payload template once per session — always; the type may be Twist OR TwistStamped
python3 {baseDir}/scripts/ros2_cli.py interface proto <VEL_TYPE>
# Twist:        {"linear":{"x":0,"y":0,"z":0},"angular":{"x":0,"y":0,"z":0}}
# TwistStamped: {"header":{"stamp":{"sec":0},"frame_id":""},"twist":{"linear":{...},"angular":{...}}}

# Single publish
python3 {baseDir}/scripts/ros2_cli.py topics publish <VEL_TOPIC> '<json matching VEL_TYPE>' \
  --max-vel <MAX_VEL> --max-ang <MAX_ANG>

# Closed-loop linear (Euclidean distance) — payload shape depends on VEL_TYPE
python3 {baseDir}/scripts/ros2_cli.py topics publish-until <VEL_TOPIC> \
  '<json matching VEL_TYPE>' \
  --monitor <ODOM_TOPIC> --field pose.pose.position --euclidean --delta 1.0 --timeout 60 \
  --max-vel <MAX_VEL> --max-ang <MAX_ANG>

# Closed-loop rotation (sign of --rotate MUST match sign of angular.z)
python3 {baseDir}/scripts/ros2_cli.py topics publish-until <VEL_TOPIC> \
  '<json with angular.z = +omega>' \
  --monitor <ODOM_TOPIC> --rotate 90 --degrees --timeout 30 \
  --max-vel <MAX_VEL> --max-ang <MAX_ANG>

# Subscribe (read sensor data)
python3 {baseDir}/scripts/ros2_cli.py topics subscribe <topic> --max-messages 1 --timeout 5

# Subscribe and return the first message only, then exit
python3 {baseDir}/scripts/ros2_cli.py topics echo-once <topic> [--timeout 5]

--dry-run: resolve topic type and validate the JSON payload without publishing anything. Returns {dry_run: true, topic, msg_type, payload}. Use to verify payload shape and topic availability before a real publish. Works on publish, publish-sequence, and publish-until.

--max-vel N / --max-ang N (Twist / TwistStamped only): clamp linear x/y/z to ±N m/s and angular.z to ±N rad/s inside the CLI before the message is sent. Pass summary.safety_limits.binding.linear_x / .angular_z from the profile (Path A) or the Rule 28 limit-scan result (Path B). Clamped axes are reported in velocity_clamped in the JSON output. Other message types pass through unchanged.

Services and Actions

python3 {baseDir}/scripts/ros2_cli.py services details <service>          # request/response fields
python3 {baseDir}/scripts/ros2_cli.py services call <service> '<json>'
python3 {baseDir}/scripts/ros2_cli.py actions details <action>            # goal/result/feedback fields
python3 {baseDir}/scripts/ros2_cli.py actions send <action> '<json>' --timeout 60
python3 {baseDir}/scripts/ros2_cli.py actions cancel <goal_id>

Parameters

python3 {baseDir}/scripts/ros2_cli.py params list <node>
python3 {baseDir}/scripts/ros2_cli.py params describe <node:param>        # type, range, read-only
python3 {baseDir}/scripts/ros2_cli.py params get <node:param>
python3 {baseDir}/scripts/ros2_cli.py params set <node:param> <value>

Controllers and Lifecycle

# Pre-motion: combined controller-active + odom-stationary check in one node spin
python3 {baseDir}/scripts/ros2_cli.py preflight motion --controller <NAME> --odom-topic <ODOM_TOPIC>

# Pre-joint-command (pan-tilt, arm, gripper): combined controller-active +
# current joint-position check in one node spin. Read <NAME>/--joints from
# profile summary.joint_command_topics[] — no live topic discovery needed.
python3 {baseDir}/scripts/ros2_cli.py preflight joint-command --controller <NAME> --joints <j1,j2,...>

python3 {baseDir}/scripts/ros2_cli.py control list-controllers
python3 {baseDir}/scripts/ros2_cli.py control list-hardware-components
python3 {baseDir}/scripts/ros2_cli.py control switch-controllers --activate <name> --deactivate <name>
python3 {baseDir}/scripts/ros2_cli.py lifecycle nodes
python3 {baseDir}/scripts/ros2_cli.py lifecycle get <node>
python3 {baseDir}/scripts/ros2_cli.py lifecycle set <node> activate

Camera and Images

Calibration (K-matrix non-zero check) is verified once, right after a camera-providing launch session comes up — see Rule 0.6 in RULES-PREFLIGHT.md. Do not re-verify it on every capture request; a plain "grab a photo" / "capture image" / "send me a picture" request goes straight to capture-image below with no calibration check.

# One-time, post-launch only (not per capture) — see RULES-PREFLIGHT.md Rule 0.6
python3 {baseDir}/scripts/ros2_cli.py topics find sensor_msgs/msg/CameraInfo
python3 {baseDir}/scripts/ros2_cli.py topics subscribe <camera_info_topic> --max-messages 1 --timeout 2

# Capture image — auto-rotates using (in priority order): 1) a structured
# camera_rotation_overrides match, 2) the URDF sensor_mounts heuristic.
# Output: {success, path, profile_applied, image_rotated_deg, rotation_source}
python3 {baseDir}/scripts/ros2_cli.py topics capture-image --topic <camera_topic> --output {baseDir}/.artifacts/<name>.jpg
python3 {baseDir}/scripts/ros2_cli.py topics capture-image --topic <camera_topic> --output {baseDir}/.artifacts/<name>.jpg --no-profile

# Depth point (16UC1 or 32FC1; returns depth_m, encoding, width, height)
python3 {baseDir}/scripts/ros2_cli.py topics depth-point --topic <depth_topic> --u <col> --v <row>

If a captured image comes out with the wrong orientation: the URDF-derived heuristic (sensor_mounts[].image_rotation_deg) is often wrong or absent — many camera mount joints only encode the standard REP-103 body→optical-frame rotation, which looks like a physical-orientation signal but isn't one, and vendor link names (e.g. Luxonis OAK's oak_link) may not even be recognised by the classifier. Don't rely on retrying or re-deriving from the URDF — record the correction directly:

python3 {baseDir}/scripts/ros2_cli.py profile set-camera-rotation <topic_substring> <degrees> --note "<why>"
# e.g.: profile set-camera-rotation oak 180 --note "OAK-D S2 physically mounted upside-down on pan-tilt bracket"

<degrees> must be one of 0, 90, 180, -90. This is a structured, one-time correction — capture-image checks it before the URDF heuristic and applies it to every future capture whose topic contains <topic_substring>, no per-request recheck needed. Pair it with a human-readable profile annotate note so other agents/sessions see why in profile show.

Diagnostics and Health

python3 {baseDir}/scripts/ros2_cli.py doctor --exclude-packages           # full DDS/graph health check (skip slow network version-lookup)
python3 {baseDir}/scripts/ros2_cli.py doctor hello                        # DDS multicast test
python3 {baseDir}/scripts/ros2_cli.py doctor diagnostics                  # hardware health from /diagnostics_agg
python3 {baseDir}/scripts/ros2_cli.py doctor diagnostics --level warn     # show only WARN/ERROR/STALE
python3 {baseDir}/scripts/ros2_cli.py topics diag                         # subscribe /diagnostics
python3 {baseDir}/scripts/ros2_cli.py topics battery                      # battery state

Launch

python3 {baseDir}/scripts/ros2_cli.py launch list <keyword>               # find launch files
python3 {baseDir}/scripts/ros2_cli.py launch new <package> <launch_file> use_sim_time:=true  # positional args (highest priority)
python3 {baseDir}/scripts/ros2_cli.py launch new <package> <launch_file> --param use_sim_time:=true,robot_name:=my_bot
python3 {baseDir}/scripts/ros2_cli.py launch list                         # running sessions
python3 {baseDir}/scripts/ros2_cli.py launch kill <session>
python3 {baseDir}/scripts/ros2_cli.py launch restart <session>

Priority: positional args > --param > --preset. --config-path adds --ros-args --params-file for YAML node-parameter files only — do not use it for launch args. Duplicate detection: returns existing_session warning if already running.

Log Introspection

Works without a live graph — reads ~/.ros/log/ (or $ROS_LOG_DIR).

python3 {baseDir}/scripts/ros2_cli.py logs list-runs [--limit 20]
python3 {baseDir}/scripts/ros2_cli.py logs query [--run <id>] [--severity WARN] [--node <name>] [--after -30s] [--text <substr>] [--max 200]
python3 {baseDir}/scripts/ros2_cli.py logs tail [--run <id>] [--initial-lines 50] [--reset]   # incremental; call again for new entries only
python3 {baseDir}/scripts/ros2_cli.py logs node-summary [--run <id>] [--top 5]

--after/--before formats: -30s, -5m, -2h, epoch float, ISO datetime.

Packages, Bags, and TF

python3 {baseDir}/scripts/ros2_cli.py pkg list|prefix|executables|xml <package>
python3 {baseDir}/scripts/ros2_cli.py pkg create <name> [--build-type ament_cmake] [--dependencies rclcpp std_msgs] [--node-name my_node]
python3 {baseDir}/scripts/ros2_cli.py bag info <bag_path>
python3 {baseDir}/scripts/ros2_cli.py tf list
python3 {baseDir}/scripts/ros2_cli.py tf echo <source_frame> <target_frame>

Robot Profile (no live graph required)

Build once; load every session. Captures robot type, packages, launch files, velocity topics, safety limits, and sensor flags — eliminating per-session re-discovery.

# Build
python3 {baseDir}/scripts/ros2_cli.py profile scan --packages lekiwi [--name robot] [--workspace /path/to/ws]
python3 {baseDir}/scripts/ros2_cli.py profile scan                      # full workspace, no filter
python3 {baseDir}/scripts/ros2_cli.py profile scan --allow-live         # also query live graph
python3 {baseDir}/scripts/ros2_cli.py profile scan --robot-type mobile_base  # override detected type

# Read
python3 {baseDir}/scripts/ros2_cli.py profile show                      # full summary + annotations
python3 {baseDir}/scripts/ros2_cli.py profile show --section summary|detail|<launch-filename>

# Update
python3 {baseDir}/scripts/ros2_cli.py profile rescan [--workspace PATH] [--packages PATTERNS] [--name NAME]
python3 {baseDir}/scripts/ros2_cli.py profile rescan --launch-file <file>  # partial rescan (fast)
python3 {baseDir}/scripts/ros2_cli.py profile rescan --packages ''      # widen to full workspace

# Manage
python3 {baseDir}/scripts/ros2_cli.py profile list
python3 {baseDir}/scripts/ros2_cli.py profile annotate "Left encoder drifts right — apply 5% correction."
python3 {baseDir}/scripts/ros2_cli.py profile set-camera-rotation <topic_substring> <0|90|180|-90> --note "<why>"

--packages accepts comma-separated substrings (fuzzy-match on package name or path). Omit for full workspace scan. summary.safety_limits.binding.linear_x → --max-vel; .angular_z → --max-ang (Rule 28).

--name gotcha when multiple profiles exist: annotate and set-camera-rotation both default to --name robot and only auto-detect the active profile when exactly one *_profile.json file exists in .profiles/. If more than one profile file is present (e.g. a stale one from an earlier session alongside the current robot's), the default silently creates/edits a robot_profile.json stub instead of erroring — and if that stub ends up with a non-empty summary, it can even hijack _select_default_profile()'s "most recently modified" selection away from the real profile. Always pass --name <robot_name> explicitly (matching the name shown in profile show) when more than one profile file exists. Run profile list first if unsure.

Load references/PROFILE.md for the full JSON field reference and robot-type detection rules.

Output Folders

All outputs are written to hidden folders inside the skill directory. Never use /tmp.

Emergency Stop

Send immediately on any unsafe motion or unexpected robot behaviour:

python3 {baseDir}/scripts/ros2_cli.py estop

After estop: verify velocity ≈ 0 by subscribing <ODOM_TOPIC> --max-messages 1 --timeout 5. If velocity is still non-zero after 5 s (10 s for heavy platforms > 20 kg), escalate as critical failure.

Nav2 Navigation

Requires Nav2 running. Sends NavigateToPose / Spin / FollowWaypoints actions.

python3 {baseDir}/scripts/ros2_cli.py nav2 go 1.5 -0.3 [--yaw 90] [--timeout 120] [--feedback]
python3 {baseDir}/scripts/ros2_cli.py nav2 go-waypoints 1.0,0.0 2.0,1.5 3.0,0.0 [--no-stop-on-failure]
python3 {baseDir}/scripts/ros2_cli.py nav2 rotate 90                    # obstacle-aware (Nav2 Spin action)
python3 {baseDir}/scripts/ros2_cli.py nav2 rotate -- -45                # clockwise
python3 {baseDir}/scripts/ros2_cli.py nav2 move-timed --duration 2.0 --speed 0.3 [--direction fwd|back|left|right]
python3 {baseDir}/scripts/ros2_cli.py nav2 costmap-clear [--layer local|global|both]
python3 {baseDir}/scripts/ros2_cli.py nav2 cancel                       # cancel active goal + zero-velocity burst
python3 {baseDir}/scripts/ros2_cli.py nav2 status
python3 {baseDir}/scripts/ros2_cli.py nav2 initial-pose 1.0 2.0 --yaw 45

Before nav2 go: run nav2 cancel first if a previous goal may still be active (Rule 9). Use nav2 status to confirm no active goal. nav2 rotate vs publish-until: prefer nav2 rotate when Nav2 is active — obstacle-aware; fall back to publish-until only when Nav2 is not running. Output (nav2 go): success (bool), status (4=SUCCEEDED), goal {x,y,frame}. nav2 move-timed: publishes /cmd_vel for fixed duration then auto-stops via zero-velocity burst. nav2 costmap-clear: calls Nav2 clear-costmap services (std_srvs/Empty).

Commands Without a Live Graph

Reference Files

This skill uses progressive disclosure. SKILL.md covers the most common operations. Load the files below when the task requires deeper detail.